Jump to content
LegacyGT.com

FSB Bushing


slimjoe

Recommended Posts

I was changing wheels today and on the front (both sides) I noticed this (the attached picture).

 

Now, am I right to say that the thing in the box is the bushing for my front sway bar? And... could I also be right in thinking that's not normal for it to be spread up and kinda open like that?

 

So if I'm right in all that, who makes a replacement front sway bar bushing and where can I find it? In addition to that, is there anything I would need to replace at the same time? I've never taken a real good look at the FSB before but if it's anything like the rear, there should be a metal shim/bracket that goes over the bushing to hold it in place. If the bushing is already in this condition, could that bracket have been damaged as well?

PIC-0002-edited.jpg.1997420cdf07c31d99523c243b7ca916.jpg

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.



×
×
  • Create New...

Important Information

Terms of Use