spacejunkiehsv Posted September 27, 2007 Share Posted September 27, 2007 What tool is required for the ATF drain plug on the 5EAT? Is it a 9mm hex bit? I put an 8mm hex bit into it, and it was just a little too small. The 10mm looks WAY too big. It is hard to find a 9mm hex bit socket anywhere. I have a set that has 8mm and 10mm. That's what I find wherever I look. I need to buy the right tool. I already have some fresh ATF (for 5EAT) ready to go. Thanks.......... Link to comment Share on other sites More sharing options...
spacejunkiehsv Posted September 27, 2007 Author Share Posted September 27, 2007 I got my answer from a fellow forum member. He has actually used the tools on his car. So, he knows. - T70 Torx for the front differential - T50 or equivalent sized Allen for the transmission Link to comment Share on other sites More sharing options...
jerseyglock Posted September 27, 2007 Share Posted September 27, 2007 If I recall, should be regular socket. Link to comment Share on other sites More sharing options...
spacejunkiehsv Posted September 29, 2007 Author Share Posted September 29, 2007 I was wrong about the 8mm socket not fitting. I tried again today, with my new set of allen wrenches and the 9mm. 9mm was too big. I put the 8mm in the plug, and it was a perfect fit. I must have been turning the socket at a weird angle last weekend. 8mm allen fits the 5EAT ATF drain plug. My T70 torx bit is on order for the differential drain plugs. Link to comment Share on other sites More sharing options...
justchil Posted September 29, 2007 Share Posted September 29, 2007 It's 100% 8mm allen wrench. I did mine today and was VERY easy. AdvancedAuto sells a funnel with a hose/cap that fits perfectly into the dipstick tube for an easy fill. I had to post due to being super happy about how easy it was lol Link to comment Share on other sites More sharing options...
spacejunkiehsv Posted September 30, 2007 Author Share Posted September 30, 2007 Yeah. It was pretty freakin' easy. I need to buy a few of those drain plug crush gaskets. I bought 10 quarts of the 5EAT tranny fluid. I plan on doing the drain and refill at least one more time to get some more of the old fluid out of the tranny. I wish I had tried the 8mm bit twice last week. I just went ahead and drained and refilled the engine coolant last weekend. Link to comment Share on other sites More sharing options...
ej20_ftw Posted November 14, 2007 Share Posted November 14, 2007 do you have the part number of the crusher? Link to comment Share on other sites More sharing options...
ej20_ftw Posted November 14, 2007 Share Posted November 14, 2007 Yeah. It was pretty freakin' easy. I need to buy a few of those drain plug crush gaskets. I bought 10 quarts of the 5EAT tranny fluid. I plan on doing the drain and refill at least one more time to get some more of the old fluid out of the tranny. I wish I had tried the 8mm bit twice last week. I just went ahead and drained and refilled the engine coolant last weekend. did you change the atf filter?? Link to comment Share on other sites More sharing options...
spacejunkiehsv Posted November 14, 2007 Author Share Posted November 14, 2007 I did not change the ATF filter. I have a new crush washer out in my car. I'll get the part number and post it from the office. Link to comment Share on other sites More sharing options...
spacejunkiehsv Posted November 14, 2007 Author Share Posted November 14, 2007 The gasket for the 5EAT drain plug is part number 11126AA040. My dealership charged me $1.16 plus tax. Just because I didn't change my ATF filter, doesn't mean you shouldn't change yours. I'm not a mechanic or technician. I'm just work on my car for fun and to save money. Link to comment Share on other sites More sharing options...
03LegacyWgn Posted January 20, 2008 Share Posted January 20, 2008 you acctually should change the filter, some techs say yes some say no, i would on newer vehicles cause if its consistantly done it will be good for it but on older vehicles where it hasnt been dont often or at all may give you some problems with the valve body if changed as well as the fluid 03 BH Mods: Group A Alt & Crank Pullys and end links, CIA, JDM L7 Grille, JDM HID lights, JDM rear tails Stromung CBE, KYB GR2's W/ H&R springs. Link to comment Share on other sites More sharing options...
fishbone Posted June 26, 2008 Share Posted June 26, 2008 Is a brave soul out there willing to put together a guide on draining the ATF? I've never done it and want to save me some money by doing it myself. Link to comment Share on other sites More sharing options...
NY2005GT Posted June 27, 2008 Share Posted June 27, 2008 (edited) I'm going to try and do it this weekend if I can get a hold of our lift (currently my fathers Firebird occupies it for a heads/cam swap, guess he got tired of the boy wuppin his all day long:) ), If I can get it done I am going to be pulling the pan and filter as well and putting in a trans cooler, I'll get a good writeup for ya but it is a super easy (but messy) job. Biggest deal with any AT is any part you pull off clean it till your hands bleed. You want it to be like new when you put it back on. really here is the whole deal if I can't get it done. Drian trans fluid remove pan remove filter (haven't done it yet but it should just pull right out) Install new filter clean pan install pan with new gasket (not sure on the torque spec for the bolts yet) Clean drain plug install drain plug fill transmission Edited June 27, 2008 by NY2005GT Link to comment Share on other sites More sharing options...
shadowsports Posted June 5, 2010 Share Posted June 5, 2010 Just got a wake up call. AT in the Girlfriend's Accord just died. Repair was costly. Decided I should change the tranny fluid in my vehicle. A little late in the game 53k, but checked regularly. Thanks to all the posts here I was done in less than 30 min. Fluid looked almost new, still pink, just not bright pink. No burnt smell whatsoever. '08 5EAT Drain & Fill took 3.7qts, used Subaru ATF. Crush Washer Part #11126AA040 8mm allen for the drain plug. I used to think that tranny fluid should be regularly checked and changed at 100k. Not anymore after seeing the inside of her tranny. Will now change every 25-30k. Thanks for all the helpful info. Link to comment Share on other sites More sharing options...
Mickeytl Posted September 14, 2011 Share Posted September 14, 2011 Ok...so the 8mm allen head socket does work then. Link to comment Share on other sites More sharing options...
Mickeytl Posted September 15, 2011 Share Posted September 15, 2011 Ok...just completed the tranny flush on a 5eat Gt Limited. It required 4 quarts for a drain and fill. I did drain it twice, so I bought 8 quarts of the amsoil atf stuff. It required a 8mm hex bit to remove the drain bolt...it was an easy task to complete. The tranny shifts flawless now. Link to comment Share on other sites More sharing options...
No DRFT Posted November 11, 2011 Share Posted November 11, 2011 What's the consensus on the tranny fluid? Is OEM fluid good enough or is there a god-liked fluid that does wonders for our tranny? I have no control over drippie. Link to comment Share on other sites More sharing options...
ChemicalWaste Posted December 27, 2011 Share Posted December 27, 2011 (edited) I used a T70 torx bit on the girlfriend's forester. Obviously that's a forester and not a legacy but I would assume it's either the T70 or T50. Shouldn't be too difficult to drain and replace the filter and refill. I got my torx bits from Autozone for free out of their bag of extras. And use OEM fluid. It's easier not to screw it up that way. Edited December 27, 2011 by ChemicalWaste missed the "n't" Link to comment Share on other sites More sharing options...
No DRFT Posted December 27, 2011 Share Posted December 27, 2011 I went to a local Subie guru and had him did a transmission flush with Subaru ATF and BG additives. The fluid were discolored but no too bad looking. Funny thing is after the flush, the car still drives the same as it did before. Nothing changed at all. I guess that's a good thing? I have no control over drippie. Link to comment Share on other sites More sharing options...
ChemicalWaste Posted December 28, 2011 Share Posted December 28, 2011 Probably better than noticing an improvement. If you noticed an improvement you waited too long. Link to comment Share on other sites More sharing options...
rsmoove Posted April 12, 2012 Share Posted April 12, 2012 (edited) I was going to change my AT fluid and differential oil this weekend. Anyone have a preference on brand of differential oil? Subaru Extra-S or something else? Or is it not a big deal as long as its 75W90 GL-5? I know the MT guys like the Subaru Extra-S, but I would imagine they have a bit more reason to be picky about it since they depend on it for shifting as well. Edited April 12, 2012 by rsmoove Link to comment Share on other sites More sharing options...
ClimberDHexMods Posted April 12, 2012 Share Posted April 12, 2012 I was going to change my AT fluid and differential oil this weekend. Anyone have a preference on brand of differential oil? Subaru Extra-S or something else? Or is it not a big deal as long as its 75W90 GL-5? I know the MT guys like the Subaru Extra-S, but I would imagine they have a bit more reason to be picky about it since they depend on it for shifting as well. Your suspicion is correct. For diff oil, any good 75W-90 will do. The factory service manual, and maybe even the regular manual, has a chart showing what diff oil weight to use for what temperature ranges. You're not going to notice a difference with X brand vs Y brand gear oil, especially on an open front diff. If you're like me, you pull a name brand synthetic and be done with it. Though it doesn't really matter, [CENTER][B][I] Front Limited Slip Racing Differentials for the 5EAT now available for $1895 shipped, please inquire for details! [/I][/B][/CENTER] Link to comment Share on other sites More sharing options...
rsmoove Posted April 12, 2012 Share Posted April 12, 2012 Sweet! Thanks man. Link to comment Share on other sites More sharing options...
rsmoove Posted April 15, 2012 Share Posted April 15, 2012 I just wanted to say thanks to everyone who put any info on this tread. I changed my differential oil and trans fluid yesterday and everything went smooth as silk! Thanks to all the posts, I had everything I needed to get everything done without having to go back to the store once. I sprayed liquid wrench on all the bolts the night before, and when it came time to take them off, they all came off easy as pie. So thank you everyone! Link to comment Share on other sites More sharing options...
SUBILGTFTW20052124 Posted April 20, 2012 Share Posted April 20, 2012 Okay, so I am trying to change my ATF and diff. Fluid. I am pretty sure how to do the differentials but am unsure about the transmission. Can someone please give me a response on the correct process to change the ATF? And possibly the process on the differentials just to make sure as well . Your help and feedback is much appreciated, thank you all! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now