GT_Boxer Posted January 15, 2006 Share Posted January 15, 2006 Has anyone else had problems with their interior C Pillar trim coming loose near the head liner? My driver's side C-Pillar trim will not stay clipped into place and hangs down from the head liner about 1/4". I haven't had a chance to take it to the dealer yet and was just curious. Also, the Momo label on my manual gear shift knob has come off. Any others suffering from this little problem. This is the round disc on top of the aluminum shifter. This too will be looked at by the dealer on my next visit. Luckily I do have the piece that came off all that it needs is a little super glue! Should I attempt to glue it myself or will the dealer have a better adhesive than what I can buy? My apologies if this post is in the wrong place! Link to comment Share on other sites More sharing options...
BrownBoy Posted January 15, 2006 Share Posted January 15, 2006 One of my clips was broken when the shop that did my sub took the car apart. The pillar would hang down a little bit. They replaced it for me. Link to comment Share on other sites More sharing options...
mwiener2 Posted January 15, 2006 Share Posted January 15, 2006 dealer should REPLACE both under warranty My Mods List (Updated 8/22/17) 2005 Outback FMT Running on Electrons Link to comment Share on other sites More sharing options...
sgt Posted January 15, 2006 Share Posted January 15, 2006 My c pillar panels warped and peeled back. Had the dealer replace them under warranty. Link to comment Share on other sites More sharing options...
caramall2 Posted June 14, 2006 Share Posted June 14, 2006 happened to see this...I just glued mine on with 2 part epoxy. Just be careful not to goop it on the visible top side. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.