LGTBuss Posted February 15 Share Posted February 15 (edited) I have a JDM 1999 Legacy GT rev B. IAM is always 0.00 (in limp mode). I replaced the o2, which is now giving normal readings. Doesn’t pop any codes. Can’t find vacuum leaks, tested and cleaned BCS, cleaned MAF, tightened heat shields, always run shell 93. The exhaust has a leak at the sprung joint after the Y, and a couple small holes in the secondary downpipe. The turbo inlet pipe is pretty blown out looking at the primary turbo, but it seems to be tight and holding pressure. It seems outrageously slow until it’s past 5500rpm, makes 4-6psi primary and 9psi from 5500-redline in 3rd and 4th gear. tuner_log_24-02-13_1400.csv Edited February 15 by LGTBuss Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now