SpecB_Project Posted September 24, 2020 Share Posted September 24, 2020 Recently bought this Spec B #393 in Colorado. I have no clue what turbo it comes with as it says BPT 10 on the hotside and thats all I can really see with the Avo Intercooler on top. So just wanted some help in identifying what turbo this is. Link to comment Share on other sites More sharing options...
Marvick08GT Posted September 24, 2020 Share Posted September 24, 2020 BPT 10 means Blouch performance turbo, 10cm housing. Past that there is no real way to tell without sending it back to blouch, if you are handy you can disassemble and measure the wheels and check. The previous owner doesn't know? The access port may clue you in to who tuned it, they would most likely have a check sheet of the mods. Link to comment Share on other sites More sharing options...
SpecB_Project Posted September 24, 2020 Author Share Posted September 24, 2020 BPT 10 means Blouch performance turbo, 10cm housing. Past that there is no real way to tell without sending it back to blouch, if you are handy you can disassemble and measure the wheels and check. The previous owner doesn't know? The access port may clue you in to who tuned it, they would most likely have a check sheet of the mods. Previous owner told be it was a VF52 but that doesnt seem correct Link to comment Share on other sites More sharing options...
Marvick08GT Posted September 24, 2020 Share Posted September 24, 2020 What does the compressor housing look like? Pictures can help narrow it down. If it is a blouch turbo, they mostly all look the same from the outside. I would guess a 20gxt or higher, as most people use the 8cm exhaust housing on the smaller turbos. Link to comment Share on other sites More sharing options...
pdXammo Posted September 25, 2020 Share Posted September 25, 2020 Previous owner told be it was a VF52 but that doesnt seem correct Nice! Did it come tuned with a AP though? Link to comment Share on other sites More sharing options...
SpecB_Project Posted September 27, 2020 Author Share Posted September 27, 2020 What does the compressor housing look like? Pictures can help narrow it down. If it is a blouch turbo, they mostly all look the same from the outside. I would guess a 20gxt or higher, as most people use the 8cm exhaust housing on the smaller turbos. So I got the turbo narrowed down to either a Blouch TD05H-440XT 10cm or a Blouch TD06-440XT 10cm. I just dont know rhe differences about each they seen similar. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now