BP5 Posted June 10, 2018 Share Posted June 10, 2018 I'm undergoing a major overhaul of my engine on my 05 lgt. tgv delete is one of the things I'd like to do. From the research that I've done, most people delete the cel codes and just copy the tgv tables so open and closed have the same maps. This seems to work for later facelift cars. Mine being an 05 I can't seem to find the tgv tables nor can I find and definitions for them. I've played around with the stock map with cobb ap, ecuflash, and rom raider. No luck. Is it good enough to just turn off the codes in a 05 car? Or should I be looking for other tables to compensate for the tgv not being there? Link to comment Share on other sites More sharing options...
DustinKimble Posted June 10, 2018 Share Posted June 10, 2018 I have an 05 legacy wagon with a jdm ej20y swap. The previous owner just disabled the TVC codes on mine. I think TVC is just used for cold starts. Did you cut the TVC divider? Link to comment Share on other sites More sharing options...
utc_pyro Posted June 10, 2018 Share Posted June 10, 2018 On your car you just disable the codes. TGV's are only used at startup, the didnt use them actively until 07+. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.