Todayzbrick16 Posted November 21, 2016 Share Posted November 21, 2016 So I've got the AP V3 wanting to run stg 2, about to install catless invidia UP and invidia catless DP. Can't figure out if egt is disabled automatically in stg 2 or if a tune will be needed or the resistor mod. This is on an 05 LGT 5spd. After searching I've gotten differing answers. If anyone could please confirm before I proceed. Have also heard that the cel doesn't cause any issues , is this true? Thanks in advance Sent from my R1 HD using Tapatalk Link to comment Share on other sites More sharing options...
serx7 Posted November 21, 2016 Share Posted November 21, 2016 I'm looking at the Cobb Stage 2/93 octane OTS map in ATR and it has (among others) P0545 (EGT sensor circuit low) and P0546 (EGT sensor circuit high) disabled. It also disables P1312 (Exh temp sensor malfunction). Link to comment Share on other sites More sharing options...
Todayzbrick16 Posted November 21, 2016 Author Share Posted November 21, 2016 That's great. Thanks serx7 Sent from my R1 HD using Tapatalk Link to comment Share on other sites More sharing options...
AWDFTW Posted May 11, 2019 Share Posted May 11, 2019 Pardon the thread necromancy, but will the Stage 1 OTS map also delete this CEL? Link to comment Share on other sites More sharing options...
serx7 Posted May 13, 2019 Share Posted May 13, 2019 AWDFTW: From what I see in my ATR (keyed to the 2005 USDM Legacy GT Manual), the Cobb OTS Stage 1 maps (91 and 93 oct) do -not- disable the DTC's I mentioned in my 11/20/2016 post above. That is, P0545, P0546 and P1312 are not marked as disabled. Link to comment Share on other sites More sharing options...
AWDFTW Posted May 13, 2019 Share Posted May 13, 2019 Thank you. Looks like I'll just do a resistor mod for the time being until ready for a protune. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.