10 secs Posted February 7, 2016 Share Posted February 7, 2016 What could I have possible done? I unplugged the harness for the DRL's and now my front power windows don't work from the driver's controls or the switch on the passenger door. I can roll the windows down on the back doors from the individual door controls only but not the driver's door controls. What did I do? Link to comment Share on other sites More sharing options...
compsurge Posted February 7, 2016 Share Posted February 7, 2016 Did you try plugging the DRL back in to see if that caused it? Check for pulled pins from the connectors. You might have pulled a ground or power wire out. Link to comment Share on other sites More sharing options...
10 secs Posted February 7, 2016 Author Share Posted February 7, 2016 Did you try plugging the DRL back in to see if that caused it? Check for pulled pins from the connectors. You might have pulled a ground or power wire out. I just plugged it back in and BOOM they work again. Why did this only happen to me? Link to comment Share on other sites More sharing options...
compsurge Posted February 8, 2016 Share Posted February 8, 2016 Something in that plug is part of the circuit for the other. See if there is a loose wire somewhere. I do not know off-hand what the plug looks like. Link to comment Share on other sites More sharing options...
08SpecB_DE Posted February 8, 2016 Share Posted February 8, 2016 Probably all tied in together. Check a wiring diagram. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.