bartlett15 Posted October 17, 2013 Share Posted October 17, 2013 I've been having some issues with the leather of my parking brake boot, where the adhesive holding it to the plastic isn't working anymore. The leather still appears to be in tact and I think I just need to re-adhere it to the plastic frame, but not sure how to go about doing so. Just wondering if anybody out there has had issues with this. I can post pictures if need be, essentially the leather is just out of place so I can see down into the area below near the corners of the boot. Link to comment Share on other sites More sharing options...
xt2005bonbon Posted October 17, 2013 Share Posted October 17, 2013 I got the same issue too. Never really found a good solution except readjusting my parking brake cable so that I don't have to pull the lever too much when engaging the parking break. This way, the leather cover no longer pops off if you see what I mean.. Link to comment Share on other sites More sharing options...
Gex Posted October 17, 2013 Share Posted October 17, 2013 Just get some spray adhesive. I like the 3m super 77 Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.