06RENN

I believe both the H630SAG000 and H630SAG001 models may be compatible with my car.

Please let me know if you have a working unit you want to sell. Preferably with the harness but I can possibly do without one.

 

Brian

I just noticed your the trade-in value you were offered. I was offered $3000 from W&L Subaru in Northumberland PA for an 05 Legacy limited sedan when it had 156K on it. It is worth more.

I also did my own, actually did it without pulling the motor, but I've helped do it that way before. Quotes in Northeast PA varied $2200-3500

Not normal but if you do it again definitely have the surfaces checked. HBolts are also single use stretch to torque type but I know a lot of dealers reuse them. Arguments can be made for both cases but for a few $$ it's worth it.

It's possible it's a fuse. On my older Acura I would hear the blower motor at anything higher than the lowest setting so the noise symptom my not mean much. Or, it could mean it was about to fail.

 

If you can locate the blower motor and the terminals you can bypass the HVAC control and supply Pos and Neg directly from the battery to see if it runs. It will operate on the same 12v as everything else.

 

Good luck.

Did you ever find out what this issue was?