2charlie

14 hours ago, silverton said:

All of that is normal.  Eyesight will disable itself if it can't see well, judging by the fact that's it's 8 degrees outside i imagine the windshield is not clear

My mother in-law made a comment of how "all the lights make it look like a cockpit" lmao. the dimmer dial above your left knee while seated may turn them off, but it'll probably turn more off than you want.

My wife was driving this vehicle. As it turned out, those red lights are normal but eyesight thing is something else; however, it seems to go away and operate normally now. Perhaps something on the window was blocking the eyesight. 

Thank you so much for all the responses, much appreciated.

Does anyone have a suggestion why every light in the legacy is on? How do I resolve this by myself? I'm really hope this is no something major.

 

I followed this instruction but it does not seem to work.

With adaptive cruise control, my 2019 Legacy 3.6r Limited is always very far from the car ahead of mine. Is there a way to adjust this distance so it's a bit closer to the car ahead of mine?

Thank you so much for all the help. Gathermewool, that is a very useful tool. Too bad Amazon don't carry it anymore.

 

I believed I can get a cigarette charger with higher wattage but I will lose the data connection and Carplay feature.

I have a iPhone 11 Pro Max and for some reason it's not always able to charge my iPhone. Does anyone know if it's 2.5w or 5W?

I opened the hood and looked at the reservoir and the liquid is not frozen though.

My 2018 3.6R Limited Legacy is not spraying fluid even though the reservoir is full and it's not terribly cold. I can hear the noise when I pull the right hand lever but no spray.

Yes, that is what I'm looking for. How do I get to the Screen Setting menu?

I tried to press the set (middle) button but nothing happens. Do I have to hold or do something?

Thanks! That does help. However, is it possible to change the kPA to PSI unit? Right now the screen is showing 220kPA.

I noticed that when the tires on my 2018 Legacy 3.6r Limited is low, the tire pressure monitoring system does not show anything on the dashboard. Is there something I need to enable to setup? If so, how do I do that?

 

Thanks!

Awesome, thank you! I'll give that a try.

So, I should not press the set and 1 at the same time then. I should press set first then 1 or 2, correct?

Thanks for all the help.

Any recommendation on winter tires for 2018 Legacy 3.6r Limited is appreciated.

I just purchased the 2018 Subaru 3.6r Limited. As I was going through the manual I wonder if mine has the following features because all the manual said was "if equipped" but how do I know if mine is equipped.

 

1. TPMS screen
   
2. High beam assist indicator
   
3. High beam assist warning indicator
   
4. Automatic headlight beam leveler warning light
   
5. Steering Responsive Headlight warning light/Steering Responsive Headlight OFF indicator light
   
6. Hill descent control indicator
   
7. RAB OFF indicator
   
8. Outside mirror defogger
   

 

Mine does not have the X-Mode. I assumed I can't add this feature at a later date, correct?

I just purchased a used 2018 Legacy 3.6r Limited. I read the manual but I was not clear on it yet. I've also watched some Youtube video but still I'm unable to set the seating. Here's what I did.

1. Adjust the seat the way I wanted.
   
2. Turn the engine off
   
3. Press the set and the 1 butt at the same time
   

 

I did not hear any beep indicating that was set. What do I need to do? Once I have the seat setting registered, I also need to set the remote as well.