bmorgan1215

Great write up! I do have an issue I am trying to resolve and was hoping I could get some feedback.

I replaced the entire control arm on my passenger side and had an issue getting the long bolt pulled out on the "hockey puck" style bushing. In our save myself some time, I just cut the bolt out. As I started to pull the entire arm out, what seemed to be a half piece of washer can out with it. Any ideas for the best way to repair it?

I am about to get an alignment but started hearing a clunking noise again from the passenger side. After looking at your photos again, I am concerned that where the bottom of the busing sits is not level (where you installed the washer) because part of the surface popped off right where there seems to be a slice down the center. I have to look at it again but I believe this is the cause of my noise. Any thoughts on a repair?

http://legacygt.com/forums/attachment.php?attachmentid=260614&stc=1&d=1515648549

Can anyone help me with a part number for the Front Control Arm, rear bushing (aka hockey puck bushing) Bolt? I had to cut it out and for some reason I am having a hard time trying to find the part number to order a new one.

The bolt is > 4.5 inches or >100cm. Any help would be greatly appreciated.