Frock_You

You can pull 12v ignition switched power right from the radio harness or from the cigarette lighter

Sent from my SM-N960U using Tapatalk

Do you have any pics of how it mounts to the trans? And what axles are you using?

Sent from my SM-N960U using Tapatalk

Yeah the WRX seats will bolt in also

Sent from my SM-N960U using Tapatalk

The 15 sti seats were a direct bolt in.

Sent from my SM-N960U using Tapatalk

That's a badass build sheet with some kick ass numbers. I have the 5th gen gt that A_Aron was talking about that got the wrong kit in the flex fuel thread. I also live in the valley and am pretty sure I've seen your car around. I have the dark grey one on air. Who did your tune?

Sent from my SM-N960U using Tapatalk

So seats are super easy. I got both front the rear top and bottom all 4 door cards out a15 sti. They bolt right in. Drivers side is heated power passenger side is manually adjusted but are heated. Just unplug and remove the stock seats swap seatbelt buckle cause the lgt belt wont clip into sti buckle(I buckled the sti belt and left that plugged into the car wiring so it always thinks its buckled and zip tied it under the seat out of site). The electric for the passenger seat is self explanatory the lgt has a jumper harness that goes from the car harness to the individual plugs under the seat unplug it from under the lgt seat and plug it into the sti seat the plugs are all different so you cant mess anything up so just plug what you can in the rest don't get used. This will not take care of the airbag or weight sensor light. That's just a 3.3 ohm resistor spliced into the yellow plugs (I kept the airbags plugged in even though I used the resistors in hopes they work if needed since the light is out). The drivers side electric is pretty much the same as the passenger seat you just plug more plugs in due to the power adjustment. So after putting the resistors on the drivers seat yellow plugs The only thing you have to do to get everything to work is splice a power and ground from the lgt harness and hook up the one empty plug left under the seat. Voila comfortable supportive seats that keep your ass from sliding around in the turns and the only thing you lose is passenger power.

Sent from my SM-N960U using Tapatalk

Still a long way from done but she's a bad bitch.

Sent from my SM-N960U using Tapatalk

Maybe we could get a few people together to lower the R&D cost

Sent from my SM-N960U using Tapatalk

I love my baja... but I went a little different route. I imported a 14 European outback with the EE.

Sent from my SM-N960U using Tapatalk

Can you still order them? The link above isn't working.

Sent from my SM-N960U using Tapatalk

So I got mine second hand but it was never used... I was told it was limited time thing made specifically for our cars. It looks just like the custco from what I can tell in pics online. But this is one of my favorite mods I've done the difference is night and day. I've driven supercars that can't stop with this thing.

Sent from my SM-N960U using Tapatalk