Partroob

I did! I ended up using a clutch and flywheel from a wrx to match the transmission. I also ditched the cable clutch and installed hydraulic clutch stuff. I ordered a master cylinder/ pedal assembly from a rhd car.. i believe from ebay.uk. slave cylinder was the same as lhd. It all worked perfectly in the end.

I can't for the life of me find the 2nd one.

No CEL with it plugged in, but fans don't come on. CEL comes on when i unplug it, but the fans come on. That's how I have it now just to cool it off extra since I don't know the temp. Could it be bad thermostat potentially? No engine swap, just 5mt swap.

Verified it's the right plug. It's brown and also the same connector on my spare motor. I unplugged it and the fans came on. I wish I could upload a picture of the gauge. The needle is basically at about a 2 on a clock when the max on the gauge would be around 11 on a clock..

pls

So as soon as I turn on ignition, my coolant temp shows way beyond hot on the gauge. Even when cold. It never fluctuates at all. Also, my radiator fans never turn on. Has anyone had an issue like this? My two guesses are bad temp sensor, or bad/no thermostat?

I have a 95 RHD Postal Legacy L. Swapped car from 4eat to 5mt with a 5mt from another 95 Legacy. After putting everything back together, I found out that that transmission was bad. I now have a transmission and diff from an 03 WRX that I am trying to swap in. I'm not sure what all I need to change out though. Will my 95 Legacy Flywheel work with the WRX Transmission or will I need to purchase a WRX Flywheel? Same question for clutch. Will my 95 Clutch kit work with this transmission?? Currently it has a clutch cable, but the WRX transmission is a push type, not a pull type. So to swap this transmission in I will need to swap all the cable stuff to hydraulic stuff. The only JDM Hydraulic Pedal Assembly I found is from a 99 Legacy. It looks like it will fit, but I'm not 100% sure. Then, I would need the clutch line parts. Since I'm RHD and will not have a WRX Pedal, I'm not sure which line I will need.. My current shopping cart is: 99 Legacy Pedal Assembly w/Master Cylinder, 03 WRX Clutch Hardline and Softline, 03 WRX Slave Cylinder, 03 WRX Clutch kit, 03 WRX Clutch fork and pin. I feel as if this car is cursed to never be complete. x( If anyone has any information or insight I would be quite grateful.