sashadg1

Funny you say that I own a Audi 2007 RS4

It's a Mach IV rear spoiler, and the flares are from Daed Mr. That is on here

I'm not sure what's wrong I'm trying to upload photos of the install there wasn't very many pics I took but it is not letting me if you give me your email address I will send them to you directly and maybe you can try to upload them.

I had the wheel bearings replaced about 8 years ago under warranty and haven't had any issues with noise since then. I don't currently have any issues with wheel bearings. The tires are a 275 / 30 r19. I probably should have gone with a 265 / 30 r19 just for fitment and would probably still look beefy as it does now. I believe they are made of a polyethylene, they are fairly flexible but not flimsy. They were made specifically for the Legacy so there was no altering cutting grinding or anything they bolted right on. The guys that help me put it on couldn't believe it they said normally we have to grind the hell out of these things and to get them to fit right. Let me pull up some pics of the install.

Wheels are a 20x10.5 trying to remember the offset but they are not quite right, I have to use a 10mm spacer to clear the springs...

Here is my legacy wagon with fender flares.

I have the fender flares I just haven't done it yet I will do it soon I have two other project cars and working on this is taking a backseat unfortunately.

Well if anyone is interested as well I will keep this updated...

This is exactly what I'm looking for including the side skirts as well, anybody know who's Legacy that is?

Sorry didn't see my first post probably cause it was moved so I reposted in what I thought was a better place, but if this works great... Wasn't being impatient....

What are the best 2 inch fender flare for Legacy GT wagon 2005, I thought I remember seeing people using 240SX from eBay or Amazon but I don't remember what year and what they actually looked like installed? Show me those flares and where they are from.... Thank you!!!

I too would like to know what flares these are, I think some are using 240sx 94' or something and seem to work out fine...let me know thanks

no you do not have to take bumper off to take grill off. I have 2005 though I do not think it is much different than mine.

Scott

do you have the front bumper off yet

Wait what point are you at you should never have to remove fenders to do this.

Where can I get the right type of grease without having to buy a boot kit?

There he is lurking, I figured you were gone for the night? Thanks buddy

 

Scott

OK I have replaced both axles, but now the boots are loose and leaked out all the grease. I need to repack the grease and re-clamp with good clamps. Where do I get clamps that will hold that will not through off the balance or do I have to worry about that. Can I use regular clamps you clamp a hose with?

 

Scott

They are actually pretty bright and noticeable, there are 23 LED's on each bulb and the backing is gloss it kicks out a small bit of shine as well.

Here they are, still working on finding a sealant. Will have to crack them open again.

I used the 10 dollar turtle wax and did not even have to use anything but the polish to get them new again. It came with 2 buffing pads for severe issues, saw the Meguires but was $24.00. I guess I saved 14 bucks.

Ok I finally did it and looks great after polishing the lenses which were real bad looking after blacking out everything but the hi beam area. Installed 16" LED strip and super bright LED blinkers. Problem ton of condensation in housing. Dried them out with heat gun its back again hours later. It has been raining but sealed the piss out of them before putting them back together... WTF it slike somebody sprayed a hose in them. Somebody posted a fix about putting something in the headlight to absorb moister? Cannot find it... anyone, anyone. Will post pics later

Oh by the way it step 9. when your drivers have not downloaded correctly.

 

where it has you redirected to correct it. It is where is says this.

"No Vehicle Interface," click here to manually change the drivers

 

 

Of course mine says No Vehicle Interface... When I follow those direction is when I have the error in step 9.

 

Any help

 

Thanks guys

I followed the instructions perfect but get this error message after step 9.

 

The folder you specified doesn't contain a compatible software driver for your device. If the folder contains a driver make sure it is designed to work with Windows x64 based systems.

 

 

Now what???