lgtPR

hi

can you check shipping to 00767 high interest my car is out of service because of transsmision.

I have a 05 limited.

Started with intermittent issues were the car shifted to a higher gear instead of 2. Also when this happend you can hear a loud clank noise from the back of the car.

sometimes i just turned the car off and it drived for a couple of days. Now it makes when you try to drive, i did added like 2 quarts of mobil 1 ATF oil since i changed the radiator lost a little fluid. Not sure if that has to do something.

Any inputs of how to sort things out? No local mechanic wants to check my car.

I do have mechanic knowledge but limited time.

Fluid is mixed. Like 3 mobil 1 quarts.

Would you reccomend a flush before anything else?

Hi

My car Legacy GT 5eat has been weird. It runs and at some times you can hear a clank sound on the back part and the car shifts to a higher gear. usually happen when shifting from 1 to 2. Scanned the car and had the following codes P0817, P0756, P0766, P0763 and P0700. if i turn the car off it works again fine for a little time. I havent used the car for almost 2 years now and i want to fix it.

Car had Mobil 1 AT oil and is full.

G-code is pretty much the standard for open (non-proprietary) 3D printers. There are some variatiosn from printer to printer, like specific commands for setting bed and extruder temperatures, but if you've got it printing already then you apparently have that stuff sorted out already.

 

In other news, I got tired of screwing with Z-axis calibration and bed leveling on my MendelMax 2 and bought a Prusa i3 MK3S a couple months ago and it's been great. Self-calibrating, built-in bed leveling, they give you temperature and speed profiles that work great with their filament... it's a big step up.

Prusa mk3 is pretty good I also have cr10s for bigger thing. Cr10s is a very good printer only thing is that it doesn't have leveling sensor.

Wouldn't they be a bit large for most printers? Or make them modular?

 

SC

It can be printed in parts. Also im building a custom printer to be able to do things like this.