NoobLegacy

So we had to change the driveshaft on our OB, we took all the tires off and jacked it up to find the source of the vibration, after we did that we found the error SS code. We checked the obdII reader and got tge P0500 code for speed sensor A. We had some issues with rats eating the wires on my fuel pump so I'm just wondering if you guys could help me troubleshoot here. All the wires on the wheel assemblies look good, but Idk about the speed sensor on the transmission where it's located Could you guys give me some pointers or insight? Im trying not to part chase and buy each and every sensor before I figure out it could of just been one. Thanks in advance!

I couldn't really find any info that would help me in my specific situation, anyone know if a '01 Outback sway bar is thicker than a '99 Legacy Brighton's? Also would they swap over. I also want to swap all front and rear brakes from the Outback to the Legacy, anyone know if I would run into any issues there?

Alright so I have a 99 legacy, its the 2nd gen body style before they went to the next so don't freak out. Still a second gen. It has a 5 spd with the phase 2 ej22. My wife had a auto 2001 outback with a dual port ej251. Long story short i want to swap it. Just need some tips and info on any special things I'm gonna need to do the swap. Also since the motor on hers was mated to a auto what changes do I need to make to get it to fit on my 5 spd. This is going to be a long term build for me but I want to make sure it's doable before I start blowing money on the ej251

Would that phenolic spacer fit the ej22 on the Brighton? Also anyone got any experience with the grounding kit, notice any difference?

I do have a quick question on the transmission mounts, are they motor specific or anything? I have a 99 Legacy Brighton wagon and was thinking about getting the mounts. I guess a more broad question is will most of these (besides the header) fit my 2.2 legacy? I'm not sure of any changes between 2.2 and 2.5 powered Leggys in particular