Shielded twisted pair is readily available. What I used was made by Belden, I don't remember the part number. Most of the wiring doesn't even need to be shielded for this swap. I used the US harness and made an overlay harness with the additional wiring necessary to run the exhaust cams. To get the proper terminals to connect to the ECU I bought a set of ECU harness connectors from a junkyard and removed the terminals I needed. Then I inserted them into the connectors on my good harness and soldered my overlay harness onto those new terminals.
Mondtster can you provide a wiring diagram in order to hook up the AVCS system?
Just picked up my swap today and would like to tackle this instead of buying a $200 harness from iwire or ia performance.
EJ20X swap?!
in Fourth Generation Legacy (2005 - 2009)
Posted
Mondtster can you provide a wiring diagram in order to hook up the AVCS system?
Just picked up my swap today and would like to tackle this instead of buying a $200 harness from iwire or ia performance.
Thank you