shootz

SOLD on eBay ($75+shipping)

5 hours ago, KZJonny said:

Thanks dude!

Helps everyone out. If the shipping from Colorado wasn't silly I'd pick them up myself for spares....

GLWS!

I'll ship them for free if you want (assuming you're in the states)

28 minutes ago, KZJonny said:

In case you didn't read the sticky on the Classifieds:

A price on the items beings sold is a requirement, not a recommendation. Not strictly enforced, but still, it help everyone get an idea what the value of sold/used items are over time. It's also not an auction, the point isn't blind offers and seller gets the best price. It's supposed to be an open market with known pricing for everyone's benefit.

This Member Classified sub-forum is for members to sell 2005 - 2009 Legacy and Outback parts. Selling parts for profit in this sub-forum is prohibited. If you want to make a profit selling parts, please find another venue (off-the-site) to market your product.

 

THESE ITEMS COMPRISE A FOR SALE THREAD

 LOCATION AND TITLE

To create a For Sale listing, first create a title that indicates, using the pull-down menu, that the item is for sale or for trade and location, and what is contained in the thread.

 

TEXT, DESCRIPTION, AND AMPLIFYING INFORMATION

 Describe in as much pertinent detail as possible what you're selling, the photos, condition, mileage, age, type, i.e., for manual transmission, payment forms accepted and required notification about posting questions, offers and acceptance in the thread. Note about photos:

 

• All photos must be loaded to the site with 24-hours. Use the Manage Attachment process
• Linked photos are not permitted in the Marketplace and will be removed where found.

AVAILABLE ITEMS

Use this part of your OP to describe what it is you're selling and the price

 SOLD ITEMS

Use this part of your OP to move your part listing from "Items Available" to "Items Sold". Keep everything intact and mark it (Sold to - Screen Name)

Fixed

Purdy!

Pulled working from Forester XT w/ 75k on the Odometer

Part #: 16611AA720

Selling as a set.
You pay for shipping from CO 80907

SOLD on eBay ($75 + shipping)

Need a spare or new set?  I pulled these from a part-out 2013 Forester XT w/ 75k on the odometer.

$80 OBO (Including shipping from CO, 80907)

I have some speaker adapters that I didn't use (didn't need all of them) for when I upgraded my stock to 6.5inch speakers recently (too late to return these parts).

The MDF/wood surround was for upgrading the rear/trunk sub woofer (only needed one spacer for the pioneer sub I dropped in).

The other bits in the bags are for the door speakers.  These all worked, I just bought extra in case I needed speakers spaced out more.

Make me an offer (including shipping from CO, 80907)

I also have some rallitek shift bushings

Bought a broken 2005 Legacy GT 5 speed manual transmission.  I have all the parts, but I'm currently holding onto the 2 diffs (center & front) and the 2 main case halves (in case my OBXT case needs to be swapped).  The 3rd gear is toast on both shafts, but everything else seems to be okay.  If you want parts, let me know what you want and shoot me a price.  I'm in Colorado Springs, 80907 if you want to figure out what shipping will cost.

Got the parts you shipped.  Great seller, thank you!!!

I can do $125 shipped for the rear bar

I was upgrading my fuel system, so that's why they were removed.

I got you!

Took off working.  60k on them, please PM me.  Thanks!

How much for the 2015 sti steering rack and the cusco bars?  (what are the specs on the bars?)

Are the sway bars aftermarket?

PM'ed
 

Interested in the control arms and curious to know the specs on the sway bar.

On 1/19/2024 at 7:18 PM, relative4 said:

My '05 LGT 5MT wagon is just about due for an engine rebuild, and I'm putting together the plan.  I'm planning on a VF52 build, and one of the big questions is, do I stick with stock fueling or go stage 3?  A big contributing factor to that decision is emissions.  So this question is for Colorado residents with stage 3 builds.  At emissions time, when I put on the stock downpipe and flash the stock tune, will that work with bigger injectors, or do I have to put on stock injectors?

Second question, also for Colorado residents: can anyone recommend good shops in the Denver metro area for head rebuilds?

Hey! I'm down in Colorado Springs.  I hope the engine rebuild goes well.  I had my car tuned out of the state (05 OBXT) and currently have bigger turbo (BNR 18g), injectors, DP, TMIC, etc.  I like the setup, but I am planing to add parts for e85.  

Current mods: https://docs.google.com/spreadsheets/d/1RdXAxPldpf0A0YS4G00VjTBCAu320GY-pCwXV1EHcEc/edit?usp=sharing

If you want injectors, once I get everything situated, my 740cc side feeds will drop right into your setup.  I would suggest a bigger fuel pump and upgraded wiring though too (~$200 max probably).

It won't effect emissions.  Your cat has to be CARB compliant in Denver, so watch out for that.  

I agree with @BoozeRS05 regarding Cryotune... lots of info and support here from them and they would know where to get your heads rebuilt.

I would like to order the following:

#19 bp rear sub bracket carbon 170

#20 bp rear sub cover carbon 190 

That's what I'm enjoying

Great part, it's been nice to have on my build.  Good luck with the sale.  Good price too.

Quote

If you haven't done this install yet, I'm in Beaverton and have the Koni and H&R springs set on my car. I love the combo, but I would never buy Konis for this car ever again. Too many failures of the front struts for my liking. 

Hmm, I haven't had one issue in the 40k miles they have on them so far.

I have koni's in my OB front struts (if you don't want to go lower, you don't have to).  PM me if you want more info.

PM'ed!

Ah, so I think you're saying that you're the same poster from the other listing back when you lived in PDX, got it.  I used to live in Hillsboro.  My confusion came since the other post has a different member name and it was worrisome.  Since it's a public forum, I wanted to clarify for all in any case, no ill-will.  Thanks for the info.  

22 hours ago, CO_LGT said:

So... would you like a PM or do you prefer making passive aggressive comments about your confusion?

 

 

Haha, I am interested, please PM me.  But I am also confused at your post being a copy, it would be nice to have a clear answer here for us.