Selnix

What are you actual questions? This thread is the do it right and all the parts you will need to do it thread.

 

If you are asking the bare minimum, it's:

LGT struts and springs (you can reuse your Outback top hats)

 

You will bottom out a bunch with this setup. Highly recommend, Legacy rear bumpstops, Legacy rear upper control arms, after-market rear camber adjustment (whiteline UCA camber bushings, or Megan camber arms, or whiteline camber and toe arms), and a 1/2 inch rear strut spacer and extended studs/bolts for it.

Aside from some new bolts and such almost exactly the swap I did, pic is potato phone quality but shows the difference from bone stock as I got it and current ride height on top.

I've been looking ahead toward what I'll need when I eventually get around to doing the Nexus mod and was wondering...

Would a bulkhead connector like this https://www.amazon.com/dp/B06WWNZ18N/ref=cm_sw_r_cp_dp_T1_wfIqzbG9D3GN8 work if plugged into a powered hub to let me plug a flash drive in for music/video/etc without having to tear into the dash whenever I'm wanting to add media?