Wolfden13
-
Posts
10 -
Joined
Content Type
Profiles
Forums
Gallery
Posts posted by Wolfden13
-
-
Do you have a video of it? I have memory retention issues after 3 strokes so I have to use videos now. Thank you.
Sent from my SM-N960U using Tapatalk
-
Its works great. I replaced the front sensor but the connector kept getting loose so the code would reappear, repaired that all codes cleared. Now a blinking sports light comes on. Most forums suggest changing the trans oil. I cant take the damn drain plug off. Any suggestions? Thank you. Sorry about the lapse I'm a disabled vet so there are some pretty long down times when my illness injuries start to act!Bought it on Amazon thanks I'll let you know how it works!Sent from my 5049W using Tapatalk
Sent from my SM-N960U using Tapatalk
-
Bought it on Amazon thanks I'll let you know how it works!
Launch CRP123Sent from my 5049W using Tapatalk
-
What code scanner do you recommend?Thanks now to try it out..Sent from my 5049W using Tapatalk
Sent from my 5049W using Tapatalk
-
I did the procedure several times no display reading looks like I'll have to purchase as scanner/reader. Thanks!Had this same problem just cleaned all of them and it went awaySent from my 5049W using Tapatalk
-
Thanks now to try it out..Here you go. Came from the outback forum. I printed a copy and put it in my glove box. From what I can remember that procedure is actually in the FSM and it will tell you what the codes mean.Sent from my 5049W using Tapatalk
-
I viewed both links nothing on the issue of blinking Sports light/ abs speed sensor. Can you assist? Thanks!Not a pro at this by any means, just pulling info from my previous research on my own personal SS error
C0104 = Front ABS wheel speed sensor LH
If you follow this procedure (if its an 05 legacy only), than you should be able to pull a code from the dash.
2-) http://legacygt.com/forums/showthread.php/cel-codes-05-legacy-5876p3.html?highlight=p0546
Once you have the code, cross reference it with --the .pdf at the bottom of the above thread.
3-) Or if you have an OBD II code reader, it may pump you out the code
.Good luck
Sent from my 5049W using Tapatalk
-
Every once and awhile my Legacy GT 2005 will start blinking the sport light on the dash, it occurs when it's shifting to 2nd. Any help on his issue, thanks!There was some method of cycling the key on off, on off, etc. and the odometer will display the code apparently.I tried it for 30 minutes one day, 10 minutes another and just gave up.
My ABS + ErrSS comes on only after heavy snow/very humid, moisture related it seems..
Did the the code tell you which abs sensor was bad? I've heard some say a simple cleaning will solve the problem. Thank you!
Sent from my 5049W using Tapatalk
-
Did anyone ever find the actual "what was wrong" My Legacy GT flashes sport with trouble getting into 2nd and or 3rd speed.I don't get the CEL or flashing cruise, but otherwise have the same problem. PDX Tuning diagnosted that it was a bad right front speed sensor. Then they promptly went out of business, or at least stop wrenching on cars.So today, I replace my right front speed sensor. It's a simple 10 minute job. Unfortunately, I take the car for a test drive and while the clicking is gone, when I hit 40 MPH, the ABS light is back on and "ERR SS" shows up again!
WTF?
Anyone know how to make this go away that does not involve a trip to the stealer? They wanted $90 bucks minimum to R&R this sensor. PDX Tuning was the same price, but they don't do this anymore.
Thanks.
Sent from my LG-K550 using Tapatalk
.
ABS Wheel speed sensors
in Fourth Generation Legacy (2005 - 2009)
Posted
Thank you for your service My Zommie brother! I say that with ultimate respect! I'll try that but it seems to be within a 11mm and 1/2" I have a torque driver but felt uncomfortable utilizing it. I'll use the method you stated I have a 12" schedule 40 pipe I use for a breaker bar when my 1/2" breaker Craftsman bar wont fit due to height to floor clearance. Sincerely appreciate your advise. Thank you!
Sent from my SM-N960U using Tapatalk