search for christmas tree lights. Will go.into specifics to reset the display. Insert key, rotate to ON (dont start car), wait ten seconds, rotate to OFF. Repeat three times.
this more than likely clears the cel from the ecu. Your call to clear or see if it clears after driving a bit.
did you change the air filter lately and was it crapped up? Do you have an oiled filter? If the maf has gotten dirty, perhaps it threw a cel. Check gas cap. Good luck.
minuccims -
we got the christmas tree lights on the dash last night. The lights I saw when we were driving were:
1) Solid CEL
2) Solid Dynamic Control system
3) Flashing Brake
4) Flashing Cruise
5) Flashing AT Oil Temp.
that last one had me really worried so we pulled over for a bit and turned off the engine. eventually the AT Oil Temp light stopped flashing and we drove home another 40 miles without a problem. the car did not run rough at all. went to autozone this morning and ended up with code P0700 and P2763.
after searching for a bit i've found two things that happened recently that may have caused this that may indicate there isn't a catastrophic problem with the transmission:
1) filled up gas tank earlier in the day - may have not tightened gas cap - this seems to trip this code for some reason
2) I recently cleaned and oiled an air filter. why did you think this may have something to do with it?
autozone cleared the codes so we'll see if they come back. any additional details about the oiled air filter are appreciated.
Check Engine Light on, Blinking Brake & Cruise Control Light & VDC Light On ???
in Fifth Generation Legacy (2010 - 2014 )
Posted
minuccims -
we got the christmas tree lights on the dash last night. The lights I saw when we were driving were:
1) Solid CEL
2) Solid Dynamic Control system
3) Flashing Brake
4) Flashing Cruise
5) Flashing AT Oil Temp.
that last one had me really worried so we pulled over for a bit and turned off the engine. eventually the AT Oil Temp light stopped flashing and we drove home another 40 miles without a problem. the car did not run rough at all. went to autozone this morning and ended up with code P0700 and P2763.
after searching for a bit i've found two things that happened recently that may have caused this that may indicate there isn't a catastrophic problem with the transmission:
1) filled up gas tank earlier in the day - may have not tightened gas cap - this seems to trip this code for some reason
2) I recently cleaned and oiled an air filter. why did you think this may have something to do with it?
autozone cleared the codes so we'll see if they come back. any additional details about the oiled air filter are appreciated.
thanks!