Jump to content
LegacyGT.com

konrad

Members
  • Posts

    212
  • Joined

Everything posted by konrad

  1. You made me check! Join Date: 09-23-2005 Post count doesn't show it
  2. Quick question on tailing floors. Can I stop in the middle or is it recommended to finish entire floor in one session. I have over 200 sq ft and not sure if I can get it done at once.
  3. I just had a nice 12 mile bike ride with my 6 year old. She did really good and did not complain. Her bike is a 6 speed so it helps a lot too.
  4. I see I am not the only one here. I have airbag light on for few weeks now. Bump on that walk through.
  5. I use InCase Ipod charger http://auctions.overstock.com/item/38718313
  6. I tried to connect Ipod both ways (headphone jack and line level out) with similar results with headphone jack being little louder. I always disconnect one source when using the other, since I can hear slight buzzing sound on Ipod when Sirius is plugged in. So there should be no difference in output level between regular CD and Ipod/Sirius?
  7. Quick question guys: I had my board installed for over 9 months and it works great. I used splitter (for Ipod and Sirius), and GLI from radio shack. I don't have any buzzing noise but sound is not quite as loud as when I listen to CD player. I have to set volume to at least 15-20 to hear music comfortably from Ipod or Sirius vs CD player less then 10. Is this common or my GLI is connected wrong? Any thoughts?
  8. Another successful install!!! Took me about 2 hours going slowly, testing each connection. I had one problem but it was my stupidity (worong connection). Directions are perfect and SQ is incredible. I would highly recommend this mod to anyone. This was my first audio install and I was surprised how easy it was. I installed both Sirius and Ipod using coupler and GLI. It is a great product and $40 is a bargain. I will post some pictures later. Thanks Jazzy!!
  9. hmm all I see is GLI with RCA set up http://www.radioshack.com/product/index.jsp?productId=2062214&cp=&origkw=ground+loop+isolator&kw=ground+loop+isolator&parentPage=search
  10. this noise filter is still out of stock. How long do I have to wait!! I want to use this one b/c it has 3.5 mm so no need to use RCA adapter but it's out of stock for few weeks now? any other place where I can get it? http://www.crutchfield.com/S-SBZkM2evOSS/cgi-bin/ProdView.asp?g=890&I=127SNI135&search=pac+sni
  11. is there a reason why you suggested RCA GLI on first page of this thread? it looks that 3.5 mm would be easier to use (no RCA adapter http://www.crutchfield.com/S-UqZTGen2fTT/cgi-bin/ProdView.asp?g=181150&I=127SNI1&search=ground+loop
×
×
  • Create New...

Important Information

Terms of Use