scrupul0us

I'll know better for next time, thanks

For some reason the forums state I don't have permission to view the link you posted. Thanks. Why didn't I think of this in the first place? Hah, thanks

Thanks for all the replies. I'd looked on Amazon and there are various kits with various sizes. I didn't want to buy a kit full of items I'd never use and figured I'd ask which ones I needed. Thanks. Low beam bulb, YT videos all showed going through the wheel well, so, that's what I did. Only took a few minutes. Thanks. Thank you very much

Swapped my headlight bulbs this evening and unfortunately broke quite a few clips in the process. Would anyone happen to the know the part numbers for the clips? (there are two kinds, if that matters) Thank you =)

Sure did, worked like a charm

Found my answer here: https://www.subaruoutback.org/threads/clock-on-2015-ltd.276689/ Edit: worked for me

Unless you're searching something different, none of the videos for "2015 subaru 24 hour clock" yield anything related to my Legacy. I don't have navi and there are no date/time settings available using the buttons on the steering column.

Does anyone know the steps to set the clock to military/24 hour time? Thank you

This isn't 1993 though... How bad can the HU coderz be to not have a decent rand functionality... That ish is simple You shouldn't have to pre-shuffle your music, that's ridiculous

^^^this All these caveats and "tricks" make this feature more tedious than it's "worth"

Yeah the thread I was referring to was a non-nav too, boo hiss. I'm non-nav and as such am useless!

GPS antenna is one of them... IIRC in the thread where all the pics were dumped there is other wires, possibly for can-bus to the gauge display I may be wrong there but the non-nav unit doesn't have an input for the GPS antenna

You are correct... The wiring is different on the nav unit as well

I'd be interested to know how people are hanging the exhaust on the passenger side of the car where there is no hangar mount (or so I've been told) Is there a DIY option sans welding?

No track days in sight for this DD. Thanks =)

Is anyone upgrading or changing out their sway bar links at the same time? Interested in what options are out there

Whats odd is if you search for "H4510AL100" there are no results. Strange

Looks like a a diff part number? http://parts.subaru.com/p/Subaru_2015_Legacy/SWITCH-STEERING-RESPONSE-FOG-LIGHT/60018258/83002AL17A.html

Are you saying that your car, which has no rear vents has the tubing for the rear vents already ran? I'm debating adding vents to the back for the kids and this would be a wonderful confirmation that I'd simply just need parts for the back of the console to complete it =)

http://cdn.meme.am/instances/500x/47339252.jpg

Knowing my luck, it would still come out and drip glue all over me

...and what annoys the bejesus out of me is while the little rubber insert thats meant to hold the ashtray holds a water bottle perfectly, it also comes out EVERYTIME you grab the bottle... My sonata had one of those rubber-wing-holder-doo-hickies in the middle and also a "fold down" set of rubber half circles in each so you could do a nalgene or a water bottle without any issues

How does the cup holder install work out? Any closer pics of what it looks like turned off (to see better) Assuming you have to drill holes?

I think we can all agree that SOA is the number one Subaru dealer in the country