05leggtlimited

Nice color choice! Any chance you got these done by Liquid Powder Coats? Martin just did mine a little while back and he was pleased with his work - I was pretty pleased myself!

 

Just put on my winter setup - freshly powder coated and wearing new winter rubber.

Shot in the dark for an old post but is that factory ride height or do you have springs?

installed axle shaft today.

A note I would like to add for the New England guys if it hasn't been mentioned already. soak your bolts previously!

The balljoint pinch bolt sheared on me. drill swear repeat.

note :You can drill from the back side with a straight shot if you remove caliper.

In removing the balljoint I cracked the knuckle. DO not use a chisel to spread the knuckle or be very gentle. In all this horsing around the balljoint with 114k failed. Long story short, 1 balljoint, 1 knuckle, 1 end link that was also frozen later its back together. Be methodical and work slow, stuff breaks if not. hope this helps someone to avoid my situation.

this just saved me a ton of time and frustration! Thank you!

I have a bad left front axle shaft and a replacement in the trunk.

Prodemand instructions have you undoing strut bolts, pulling wheel speed sensors etc etc. The less you take apart the smaller chance of error.

New wheels seeing as my seasons going to be starting soon.

 

nice! I9 stuff is incredible

05leggtlimited - Do you drive a red LGT? I saw an awesome on in Dalton last summer and I've wanted to find out who's it is.

No mines silver on gray wrx wheels. I think I know who you saw though