-
Posts
44 -
Joined
Content Type
Profiles
Forums
Gallery
Posts posted by DarkCloud23
-
-
Excuse the dirty-ness of it all. Here is the pics I said I would update with. What y'all think?
Sent from my LM-V405 using Tapatalk
-
I want something for the cream-colored cloth seats in my Legacy, but I'm not sure if I want to pay a ton of money for something that won't work well or will just look tacky...worse, something that will stain the cloth seats when i take them off some time in the future!
I hear you and I understand. These were made by Mastercraft. I got these used but they were pretty much in good working condition with no tears or spots. I got them for $30 and he paida little over $250. Mastercraft does make good seat covers. These are my first-ever that I have owned that are not from Walmart or Target or some auto parts store. I looked into wet okole. But Mastercraft uses a strap and buckle system where it goes under the seat in behind it to snap it and tighten. It's pretty good. it doesn't match my color scheme but for $30 I could not pass it up. I have the black interior but the seat covers are black and tan. I'll send pics as soon as I can
Sent from my LM-V405 using Tapatalk
-
I installed neoprene mastercraft seat covers, front and rear. Feels food. Adds a little cushion.
Sent from my LM-V405 using Tapatalk
-
Happy SubieSunday and Easter fellas and chicas. lol. I got a Vibrant Ultra Quiet Resonator installed to go along with my Nameless 5". It definitely minimized, but not removed it entirely, the drone within the cab. Before the resonator, i didnt like the drone inside the cab after installing the Nameless 5" CBE. It did sound good at certain RPM's, of course, but i knew i could clean it up. The Vibrant Res helped out and i appreciate the sweet sounds. If i were to do another performance mod, i would want to do some custom headers (i know, you cant get a lot of power out of the 2.5 for our legacy's, but i guess im going for "sound" if thats a thing. lol. I will be upgrading my HK sound system with something better. stay tuned. Let me know if you guys want a clip of the nameless&vibrant setup.
-
Spent a little time, and applied some smoke film on my headlights and my mirror turn signal lenses.
Sent from my LM-V405 using Tapatalk
-
Good stuff!A little update on the Audio Build.. Almost done.. This will still be a Daily Driver with a Trunk and Full Usable Spare..Sent from my SM-G965U using Tapatalk
Sent from my LM-V405 using Tapatalk
-
Cleaned my throttle body, MAF sensor, changed my engine oil and filter. And threw on some new wiper blades. No biggie.
-
I have H&R springs in right now. All 4, i can fit 2 fingers snugly between the gap and looks even all around. I have new coilovers but have yet to install them. COMING SOON. I am happy with the tires and wheels combo. Feels better than my previous Michelin a/s 3+ tires. For the 57CR'S, think I should have went with 19's. lol
-
I applied Chemical Guys Natural Shine Car dressing on some new Stickies, 245/45/18 Michelin Pilot Sport 4s with Rays 57CR 18x8.5 +50.
Sent from my VS995 using Tapatalk
-
Ordered the STI JDM Subaru Legacy front lip, It will take several weeks to get it.
I ordered the front cherry under rubber from SMY, it arrived two days ago...
Total spent? Close to $800, it better add 300hp!
Next thing to order is the rear spoiler lip, could get it for cheap, I am not sure how I feel about the rear spoiler, I think it looks nice, but I also like the current clean look of the back of the car.
Nice. yes, the 300hp is there. You may not feel it though. haha
-
Oh man, can't wait for pics. Hurrry lolJust ordered me RX350 projectors,STi-R clear lens from TRS and also had them tuned it.So will be re-opening them headlights again!!
This time I will blackout the headlights..
Sent from my VS995 using Tapatalk
-
Thanks. Yeah I just got to slap that bad boy on. It did not come with the Bottom Grill. I don't think HKC speed makes one. I just picked up some of that mesh grill online and cut it to size.Looks pretty nice,i would put the emblem on.Did it come with the bottom grill?
Sent from my VS995 using Tapatalk
-
Finished up the grills finally . what do,you guys and gals think?
Sent from my VS995 using Tapatalk
-
Nope, there is 0 orange peel. It might look like it from
The picture due to the sun going down. I found that 3M films have an orange peel.
Avery Dennison makes awesome vinyl wrap products.
Ive had the opportunity to try 3m and avery dennison. Although both have good adhesion, i think i like avery just a little more bc its easy to remove if i want to reposition and its easy to work out the small wrinkles. Or...maybe im just a noob with vinyl applications.
-
I might agree on the Soap Choice yes a little overkill.. But for their Polishes, Sealer and Wax their on point.. Plus I get miltary discount thats alw always a good benefit.. Aksi l like their Tire Gel.. Doesn't make it too shiny but also dries to the touch on about 5 minutes after applied and doesn't spin off..
Sent from my SM-G965U using Tapatalk
Military discount always a good thing. I remember the days shopping at 32nd NEX and MCRD.
-
+1 for Chemical Guys, whole pricey their stuff is solid.
I too use their products. I love 'em. Just recently, the wife got me a Chemical Guys Kit with a variety of products for one of my b-day gifts. Before though, I was using either Meguiars or Mothers. Cant go wrong with any of 'em.
-
Test fitted Stanza Grill from HKC-Speed. Nice and snug fitment. Currently running without emblem at the moment, but i MIGHT put it back. I am custom fabbing the same style grill pattern for the bottom grill so I will post pics soon once i finish the front. Will be adding also a mesh screen between the main grill and radiator to protect the radiator from debris and what not. Its hardly noticeable.
-
I installed Whiteline Front Roll centre/bump steer - correction kit (KCA313). Pretty much i replaced the outer tie rod,and lower ball joint. I confirm it fits on 2015 2.5. It took me about 3 hours to do. I took it for a spin after an alignment and I can feel the difference. Over bumps, small potholes, and little dips, my steering wheel does not veer off center as it did prior. At taking turns, it has a little less sway, or I feel I have a little more contact with the road than before. All in all, im happy with this install. I'm sure down the road I would have to change the outer tie rod anyway. Plus, the kit was a gift from a friend.
Sent from my VS995 using Tapatalk
-
Agreed. Black interior with the tungsten would have been awesome.I LOVE the tungsten color... if only I could have gotten it in black interior - I think that would have been THE classic combo of all. Settled for white and black. Sharp lookin car! Looks brand new.Sent from my VS995 using Tapatalk
-
Thanks for the pics. Great work. Any tips for a noob that hasn't opened up headlight housing before?Hope pics work now,,Sent from my VS995 using Tapatalk
-
Luuuuuucky! Lol good stuff. Did you have to separate the headlight housing? No right? Or was it just removal of that lens area? I didn't do any extensive research about the lens removal when I had my bumber off. That would have been the best time. *bangs head on desk*Just finished installing 90mm Halos and clear projector lens.Sent from my VS995 using Tapatalk
-
Just buy some PIAA Yellow HB3 High Beams.. Thats what I have..
Sent from my SM-G965U using Tapatalk
Lol, yeah i got those installed too. I like em. Ive always used yellow bulbs in my previous vehicles, mostly Piaa's over polarg and nokya.
-
Looks great wolf!!!
-
Eagle design would be nice. What background colors were you thinking of having? Colors of eagle design? Natural?I'm working with them to get an eagle design done. Too bad they don't do different front and back. I like how your front turned out (excluding the yellow film. Just not my cuppa tea).Sent from my VS995 using Tapatalk
Which brand of brakes are the best bang for the buck?
in Sixth Generation Legacy (2015 -2019 )
Posted
I am using hawk 5.0s in the front. I feel it has better stopping better than oem pads, but more brake dust is produced. I might want to try something else next tine around. And im thinking about upgradong rotors, just cuz.
Sent from my LM-V405 using Tapatalk