leolfds

That's the JDM style grille and you can buy it from JapanParts or SMY Performance. The red trim is pinstripe tape. See video below.

Car looking great as always. The drop is more noticeable from the FB pictures you posted. This one is a little too dark to see, and I have the screen brightness all the way up. Nice buses.

Hope it helps.2 Spark Plug.pdf

He bought a VW Scirocco R.

This link below will give you some of the info, including link to other threads that might help. I did not install mine so I can't help you there, but I know they are not just plug and play. There are some level of wiring required but it isn't very hard from what I heard. http://legacygt.com/forums/showthread.php/new-c-lights-diode-dynamics-just-released-259704.html?t=259704&highlight=lights

done

Nice set! did it come with tires and tpms or did you use your existing ones?

Let's keep it going in the spirit of Memorial Day weekend and just a regular Sunday in general Score Board: Tigger73: 29 Grnlantern1: 22 Laz: 11 TTG: 9 Im2c0ol: 9 Nybz: 5 Twisted freedom: 4 Mehilovich: 4 RobbieGT: 4 BeastCoast: 4 SubieboyLGT05: 3 Subybru: 3 Andrew_l_s: 3 Kaopealii: 2 PNWHardcore: 2 Sos123: 2 2_From_NH: 2 Opie: 2 15LegacyRyan: 2 Bozyczko: 1 Cyc66: 1 CCC555: 1 MaheshBabuKolla: 1 Citadel: 1 Skye_scoob: 1 Wagonofdoom: 1 GTEASER: 1 SubieN8: 1 Fiatz79: 1 Msmoto: 1 Krispybacon: 1 SubyBru: 1 leolfds: 1 Next Challange: Your legacy next to a cold one (beer) in a driveway, parking lot, garage, parking spot, etc. Pictures of you drinking and driving are not allowed. http://i45.photobucket.com/albums/f63/prowler82/Subaru%20Legacy/IMG_0766_zpsqmijfcnr.jpg

I don't think anybody here has yet so you will be the first to.

I like the purple one.

The light does look a bit purplish but looks good. It look very bright and could be a little annoying (for me) driving with them on. I would definitely look look into tapping the power wire from maps/dome light source so they can turn off. Good job on the mod!

What goose said... at least 5 evenly spread coats, 45mins of dry time between coats, then 10-12hrs dry time before putting it back on the car.

The only challenge with installing the fogs with the bumper off is leveling them. I had to stand the bumper on wood blocks, then disconnect the harness, lean the bumper forward and make adjustments. Took a few pictures last night of the fog harness and the housing installed for future references... Passenger Side Harness... (blue/yellow is hot) http://i45.photobucket.com/albums/f63/prowler82/Subaru%20Legacy/1_zpsxrxibqc1.jpg Diver Side Harness (red/yellow is hot) http://i45.photobucket.com/albums/f63/prowler82/Subaru%20Legacy/2_zpsrewftukf.jpg Match the polarity on Morimoto's harness (red is hot / black is ground) to the car's harness. Before seating the prongs to the connector first plug them directly to the car's fog harness to make sure the fogs turn on. Once you check that, just seat the morimoto prongs in the provided connector plug. Make sure the prongs are inserted the right orientation and matching polarity to the car's fog harness. Removing the prongs from the connector after they are seated is a PITA. Below is how it looks completed with the polarities matched. http://i45.photobucket.com/albums/f63/prowler82/Subaru%20Legacy/3_zpsngpuwuce.jpg The oem fogs are held in by a screw and a push clip. Remove those and the oem fogs will slide out. Then when you mount the Morimoto's to the bumper will notice that only one of the holes on the outside bracket will line up with the bumper's mounting holes. That is ok and i only used the original screw secure the fog to the bumper and not the push clip. "The_Grey_Goose" did the the same to his and they are still on and holding up nicely. fyi... you don't need to use the screws that come with the Morimoto fogs. you can set those aside. http://i45.photobucket.com/albums/f63/prowler82/Subaru%20Legacy/4_zpsfjegpgcw.jpg http://i45.photobucket.com/albums/f63/prowler82/Subaru%20Legacy/5_zpsabfihfwh.jpg http://i45.photobucket.com/albums/f63/prowler82/Subaru%20Legacy/IMG_0692_zpsp9lkpane.jpg Plug everything in and turn the lights on and make sure everything turns on. Now is a good time to check if the fogs are leveled. You can do this with the bumper off or on. I chose to do it with the bumper off. I leveled it off the floor (at height) on wood blocks and turned the metal screw on the morimoto housing to adjust them up or down as necessary. Clockwise will raise and counter clockwise will lower the the light.

Bump Post them up people!

You are correct. The front end corner covers underneath the car come off by removing a few push clips but you will need to either jack the front end up or roll it on ramps to give enough ground clearance. I was doing other mods that required the bumper off.