Stirfry_LGT

I cad'ed up a bracket for retrofitting our cars with the new Mini H1 7.0 projectors. TRS doesn't sell one yet, and a lot of people are having success with 3D printed ones over on HID Planet.

 

Use 4mm/#8 screws to mount the projectors using this bracket. You might want to also print with a 100% infill for added strength.

 

Change the attached file from a PDF to .stl

 

http://www.thingiverse.com/thing:1471991/zip

Bracket is available now, check TRS.

I had not. I'll look more into it when I get home. Thats a pretty slick custom job. The main issue with 3D printing a faceplate is going to be surface finish. I'm not in my car but i feel like there is a slight curvature to the faceplate (convex, left to right). IF this is the case, there is really no way that I can print one and get a good finish. If it's flat / nearly flat, and I can render it flat, then I can get a great finish on my glass bed. I'll look when I get in the car.

You are correct on the curvature. I ended up flattening mine out somewhat for that single din build in the link.

If you are interested in printing the face for a possible kit, I can provide measurements of what I have. Let me know.