MonopolyMan
-
Posts
12 -
Joined
Content Type
Profiles
Forums
Gallery
Posts posted by MonopolyMan
-
-
Reviving an older thread here, but is the way to get rid of the Canbus code simply to load on a manual transmission ROM? I sent ThrottleHappy a PM but haven't heard back.
I'm currently in communication with him to see if he can do a UDSM ROM, waiting to hear back.
-
PM throttlehappy please
Ok will do
-
Spot on !
Still need throttlehappy to check it out in person and fine tune.
The right manual rom and away goes all the issues and cruise control back:)
Wow! That's fantastic dude!! I'm assuming you're open source tuned? Would you mind sharing your ROM with me so I can reference it compared to others?
This makes me very happy, I'm about to start my 5spd swap and was dreading losing cruise control! I use my car mostly for road trips so cruise is very nice to have.
Thank you:)
-
Oh man, I didn't know you could do this! What year is your car? The passenger occupancy system is different between a few of the years. I have an 05 personally and also need a way to trick this. Keep me updated if you make any progress!
Sent from my iPhone using Tapatalk
-
Interesting. You glued yours to the plastic trim. Mine are glued to the lens itsself. I dont know if one was is better than the other or not. Being on the lens did use up all the tube, where yours is a slightly shorter distance to cover.
Nice, clean install. How did you wire them up? Drl or parking lamps?
Ohhh you did? I thought about doing that but I wasn't sure which way you went and so I did it this way. If I were to do it again I would do it your way for sure.
I wired the amber to each blinker but the white is wired to a rocker switch that I can turn on or off anytime. I disabled my DRL's because I have HID's inside my Morimoto Retroquik projector retrofit and the low voltage from the DRL being on would destroy the ballasts.
Thanks man, I'm really digging it! I went to a car meet last night and they got tons of attention.
Sent from my iPhone using Tapatalk
-
Badass man. Looks sexy on the red too. Nice clean install. Any info or tips on the install for other future installers?
Yeah for sure.
I made the mistake on the first one by not cutting a spot for the end of the led tube to go and had to do it after I already painted it. Make sure you cut a section out in the middle just to the right of the projector housing, but also on the top corner because the led tube is about 1-2cm to long.
http://tapatalk.imageshack.com/v2/15/02/01/e4134508342a049c651624d7a8fbcfae.jpg
I also went to fast and did too long of sections super gluing the tube down on the first one, my advise is to go slow and glue 2-3" sections at a time, use clamps (I used bad clips) to hold down the corners as they like to lift up.
http://tapatalk.imageshack.com/v2/15/02/01/a265987583b751fac03e200bbc2c274d.jpg
The last thing is I used electrical tape to cover up the bottom of the led tube as the super glue seeps out and looks crappy. I'm not sure how long this will hold up so I'll keep you guys posted.
http://tapatalk.imageshack.com/v2/15/02/01/53012af55cfc754a8d18409102d8900d.jpg
Sent from my iPhone using Tapatalk
-
Finished them tonight!
http://tapatalk.imageshack.com/v2/15/01/31/a4a45c1060aa12abf9094cf4c8375cb8.jpg
http://tapatalk.imageshack.com/v2/15/01/31/b81cd69d3e89401849f82e7e4bd4ad65.jpg
http://tapatalk.imageshack.com/v2/15/01/31/e88a99e4aa3f4deedb5ee41aaca03d06.jpg
http://tapatalk.imageshack.com/v2/15/01/31/775227792e4541c13dbeda2a0a1c36be.jpg
Sent from my iPhone using Tapatalk
-
I'm doing my own also. Pretty happy with the results!
http://tapatalk.imageshack.com/v2/15/01/30/c00358268eb006527a0266b4d7b49a33.jpg
http://tapatalk.imageshack.com/v2/15/01/30/56dbfa66fdd67e78e8b944a21808e8d3.jpg
http://tapatalk.imageshack.com/v2/15/01/30/ad7865a7ee68cf815799d04d4e45639c.jpg
Sent from my iPhone using Tapatalk
-
Wow good timing! As you know I'm trying to trace my leak down right now before you can finish my tune. Thanks for the assistance!
Sent from my iPhone using Tapatalk
Another 5eat to 6mt/5mt swap questions. (05+ LGT) thread
in Transmissions
Posted
You have to flash a manual ROM/bin to the car, or modify the hex code in the map you have to be a manual.