R32

Anyone know what size spacers, if necessary, would be needed to keep the car level with an Eibach/Koni combo? I have an '08 Outback 2.5.

It's a 1.4" drop front, 1.3" rear.

Feal coilovers were recommended by a local shop.

Another recommendation was scale coilovers with lift spacers at all four corners. But I have no clue on the general performance of scale coilovers.

My gut is to stick with a strut spring combo and use lift spacers at all four corners. 1" rear, 1/4" front.

Wow I just went through all 81 pages. I've even inquired with some vendors.

07 Legacy Wagon GT

Goal: Near OEM ride height (+/- 0.5" of ride height forgiveness) while retaining a stiffer overall suspension setup.

From what I've read:

1. Go with H&R Sport springs with KyBs

2. Go with H&R Sport springs with Konis

If choosing 1 or 2, use a 3/8 or taller lift spacer for the rear. Using 1 or 2 leaves the option for using aftermarket anti-roll bars as well.

3. If baller status, go with Feal Coilovers with full suspension height available.

4. Go with Rallitek springs w/KYBs

If going 3 or 4, lift spacer not required, but aftermarket anti-roll bars are NOT recommended with the Rallitek springs.

All setups should allow for 18 x 8 wheels without fender rolling.

It took me A LOT of sorting just to find proper ride height photos.