waltm
-
Posts
9 -
Joined
Content Type
Profiles
Forums
Gallery
Posts posted by waltm
-
-
-
Sorry, only the steering wheel.
-
-
Sorry, for some reason I'm not getting notifications of posts or PMs.
Sway bars sold through local ad. I believe to funnyman06.
-
-
I've had to re-solder one of the switches on both my LGT and my wife's FXT key fobs when one of the buttons stopped working.
-
Just thought I'd chime in here.
I had a similar situation as yz123mx, bought car from auction with two spun bearing. Replace most of the components in the oiling system when the engine was rebuilt but cleaned out the pulleys (or at least I thought they were clean).
Logs looked the same as yz123mx's above. Verified wiring to OCV was fine (current draw in log), cleaned and verified operation of valves and swapped OCV from left to right side to see if issue would follow valve or stay on same cam, verified oil flow to right side OCV. No change in logs so replaced intake pulley. Now both side are working fine.
Thanks Underdog and everyone else who commented in this thread as it was very helpful to get to the root cause of this.
Still have some issues to sort out but at least this one is fixed.
RI: Invidia turbo back, Weathertech fronts, Momo w/audio, sway bars, etc.
in Member Classifieds (2005 - 2009)
Posted