MarcLgtSTI

Is the engine out? Would you be willing to sell just the heads and are there pics of the engine out?

Engine is out but decided to keep it and just rebuild. Sorry bud.

Dibs on the injectors

First in line and will contact once they are pulled! Do you need them by a certain time?

Hello All,

Here's my list of whats on sale! ALL are OBO

!!SOLD!!- Drivers door panel Has window / lock controller but shows the most use ( Missing door latch but can be found very easily)

!!SOLD!!- Passenger and both rear door panels ( Minor scratches and one panel has a small crack where the speaker is)

!!SOLD!! - Drivers heated / electric seat

!!SOLD!! - Rear seat both complete

$350 Injector Dynamics ID1000's - TOP FEED - will be pulled once the motor is swapped so call dibs if you want em.

NOTE SURE WHY MY PICTURES AREN'T POSTING BUT HERE's THE LINK

https://freeimage.host/pantsmasterflex/?list=images&sort=date_desc&page=1&seek=JWSkAX

Hey all, so I went through the entire diagram of the rear seats and found some misc parts that may help with your build.

64396KA010 - This is the plastic part your rear side cushions clip into. My swap came with one missing. In 05's you'll have to cut holes for these to put into as mentioned in the build

64375AG03A - Rear seat strikers that your main rear back cushions clip and lock into

If anyone else needs help finding parts let me know. I have picked apart each map piece by piece

Shouldn't be a problem Leftcoast_LGT.

I have a BSM winged trunk looking for a BSM wingless!

I installed 35w 6000K HID on my car this evening! I modded my Cap differently as well. I removed the O-Ring, and actually took a utility blade and cut about a .5" slot on the bottom of the cap. Now that theres a small opening on the bottom, run the wires to the little slot and replace the O-ring. Lock the cap back and viola!

 

Also anyone have issues with their HID's pulsating or flickering? Theyre on, but still pulsating

Make sure your lights are switched on. They will automatically turn on because of your DLR's but it will send low power, which will cause them to flicker. Or disconnect your DRL. My headlights / fogs would flicker if I drop the E-brake without turning my headlights on.

Great thread instructions!! Def. helped me install my new Diode Dynamics 3000k Fog lights. Modding the caps and re-splicing the wires were a little tedious but with the right tools it came out perfect and only took me 2 1/2 hours (mostly because I took my time looking for a nice mounting spot and making sure I cut the caps correctly. I sprayed some rubber sealer around the grommet to ensure no moisture gets in just incase.

Here are some pics!!

http://i28.photobucket.com/albums/c245/pantsmasterflex/IMG_2536.jpg

The Drem. worked great and I cut the circles a little bigger than 7/8 to ensure the grommet has walls to wrap around. Then sprayed with sealer.

http://i28.photobucket.com/albums/c245/pantsmasterflex/IMG_2537.jpg

http://i28.photobucket.com/albums/c245/pantsmasterflex/IMG_2539.jpg

Quick test!

http://i28.photobucket.com/albums/c245/pantsmasterflex/IMG_2540.jpg

http://i28.photobucket.com/albums/c245/pantsmasterflex/IMG_2546.jpg

http://i28.photobucket.com/albums/c245/pantsmasterflex/IMG_2547.jpg