-
Posts
346 -
Joined
Content Type
Profiles
Forums
Gallery
Posts posted by N.Y.X.
-
-
Thanks man!!! So I swapped everything but the carpet (discontinued and the ones I have found were sub par), door cards (still debating, but they have a different wood grain and I am not sure you can remove it, so still figuring that out) and the rear side trim which I am also not sure I am going to swap.
I thought they had the lumber, they are 2010 non heated seats. I will have to double check now.
-
They are 19x8 et 33 IIRC.
-
I find them to be very comfortable, but also read a guy that did the swap started having back pain, I don't see how as there still is the lumbar adjustment. But 100% worth the swap, especially if you have a limited with black leather!!
-
New wheel look great. So jealous of the seats. Do you still have height adjustment?
Thanks man!!! I really, really like them, but wish I didn't have to run a 5mm spacer... but is what it is.
Not nearly as much adjust-ability as the stock seats, but they are comfy as hell!! AND I don't slide around in the seat, at all!! Love them.
-
We need another side profile shot......
Here's some comparison shots....
Cleaned her up a bit with her new setup...Had a little hit and run, typical.
Got the rear, black, OBXT seats, bolsters and seatbelts. With that said all that is left are the door cards and the carpet. But I am kind of liking the amount of tan and black and the carpet is discontiued with subaru, so not sure what I am going to do.
-
Cleaned her up a bit with her new setup...
-
Cleaned her up a bit with her new setup...
-
-
So far so good on the rim fitment, looks like I am not going to have to pull the fenders.
-
So far so good on the rim fitment, looks like I am not going to have to pull the fenders.
-
Anyone needing a JDM bezel, I have one for sale.
-
I have a few question for the early adapters who used LGT wagon stuff with stock OB wheels & tires. I have been planning on Konis in LGT wagon take-offs for years. I have them (not assembled yet) and new Legacy bump stops. Do I really need anything else? It seems to me like the first few folks who did this reported everything was fine, but more recently folks are saying the Legacy upper arms are almost necessary along with camber bushings. I don't want to buy anything I don't need, but I also don't want to get it together and find out it is still on the bump stops too much or won't align decently.
Thanks, Doug
This is purely how concerned you are with a proper rear alignment. If you're diligent in tire rotations, it won't be that bad.
-
-
Happy Holidays!!! Lets rock and roll!!
http://i1063.photobucket.com/albums/t503/childreth13/20161223_174706_zpskwkzy1fw.jpg
http://i1063.photobucket.com/albums/t503/childreth13/20161223_174631_zpsoim1pzkp.jpg
-
Excellent, I have everything I need ordered except the optional Bluetooth items:
"Optional: GROM SUB08B3 Bluetooth for 07-09 Legacy
Optional: USB Powered Bluetooth FM Transmitter"
Thanks again
-
-
Bump, I scored one as well!!
Also, 1st link is broken for me.... What's the part number to the "OTG" cable required? Thanks!!
http://i1063.photobucket.com/albums/t503/childreth13/FB_IMG_1482077717707_zpsae4hcxsi.jpg
-
Thanks man, I guess I will keep scouring the buyee pages....
-
Ahhhh. So it looks like the reasonable answer is pick up some usdm ones to mod as that will be far cheaper. Thanks for the input all! And the write up for sure!!!
I have found a handful of these, but they have the slot for the nav buttons....|
-
Thanks mate! So where do I procure the one that is "suggested" as noted above.
-
This one looks a little different. Oh cause it's a single din conversion.
http://buyee.jp/item/yahoo/auction/s508872418
So this is what I need, minus the nav screen?
-
Where are you all sourcing the JDM bezel?
-
-
Right on guys, thanks a ton. Looks like they have 2, but I'll get the blue one lol.
Official Lowered Outback Thread V2
in Outback Photos
Posted