-
Posts
8 -
Joined
Content Type
Profiles
Forums
Gallery
Posts posted by Alleya
-
-
links please
http://www.diytrade.com/china/pd/10610538/Subaru10_Outback_Angel_Eyes_headlights.html
these are the only ones i could find
-
Anyone considering replacing the rubber OEM exhaust hangers should look at the Kartboy 12mm Polyurethane Exhaust Hangers. You will need five (5) on a 5th Gen LGT.
I used a exhaust hanger tool to remove the old OEM ones (well worth it if you can source one).
The trick to an easy install of the stiffer Kartboys, for me, was to dump them into a bucket of hot water to soften them up. I used a small dab of white lithium grease on the ends of the hangers, and was able to push them on by hand without any drama.
They sell a short, long, and standard version of the 12mm hanger. What did you use for the 5th gen lgt? And was it stock exhaust or aftermarket. I would imagine the long ones would let aftermarket drop a little for a large diameter muffler.
-
2011 lgt oem struts with aftermarket springs onto 2012 2.5i with 18 x 8 32 mm offset rim. tires 225/45/18. Any compatibility issues there? Wasn't planning to lower but getting tired of wheel gap....
Parts from other models/years that fit our 5th gen.
in Fifth Generation Legacy (2010 - 2014 )
Posted
lol didnt even see that Ive seen them on a few other sites as well. One was here in the states. as far as what they look like though this was the only set other than oem i could find.