Jump to content
LegacyGT.com

shimmies

Members
  • Posts

    17
  • Joined

Posts posted by shimmies

  1. Installing a Killer B inlet on my Legacy currently, but the intake manifold is off since I was doing TGVs as well. Will update once it's all on how the install finishes up. So far, the OD of the hard inlet should make fitting it much easier without pulling the intake manifold. Although the fittings that came with the inlet were a bit over sized so I purchased some different ones to fit my application better (boost solenoid and evap hose)
  2. Well I've been doing the headlight/front end swap the last day and a bit. The turn signal bulbs were missing so I found an equivalent with gm. Otherwise nobody near me carries the WY21W.

    These are for the Chevy Spark, but they fit the socket and do work!

    d1560ed964a501e217817dd2fa589e82.jpg

     

    Sent from my Pixel using Tapatalk

     

    My understanding was that WY21W is the same as 7440, but I can't recall if I'm using the original JDM bulbs or not

×
×
  • Create New...

Important Information

Terms of Use