MNRZR
-
Posts
62 -
Joined
Content Type
Profiles
Forums
Gallery
Posts posted by MNRZR
-
-
Oh you can adjust them...It's just likely that you'll end up damaging them in the process and is therefore not suggested by the mfgr.
-
Iridium plugs are not to be adjusted. If you feel they are out of spec, exchanged them where they were purchased.
-
I didn't drain mine. one bolt holds the hose to the top of the pump. just take out the bolt, then quickly lift the hose above the level of the fluid reservoir and you shouldn't lose too much fluid.
X2
No need to bleed if done this way.
-
Got 'em!
Thanks SeeeeeYa!
-
Does anyone have a copy of the plans for this kit? I tried the link and login info in the original post, but it doesn't seem to be working anymore. Any help is appreciated.
-
Thanks for the clip. I like the sound.
-
Anyone have an aftermarket catless downpipe with an OEM exhaust sound clip?
I'd also be interested in hearing this setup.
-
Thanks to the OP and everyone else who contributed to this walkthrough. Replaced mine yesterday. The drivers side rear plug took longer than the other three combined. I just couldn't get the boot to center over the plug while inserting the coil/boot in to the plug well.
I used [ame=http://www.amazon.com/GearWrench-81213-8-Inch-Cushion-Ratchet/dp/B0014ZXXKO]this ratchet[/ame] to get it done. Thin head profile and flex head made removing and installing the plugs fairly easy.
GrimmSpeed 08+ WRX/LGT Top Mount Intercooler - Any Interest?
in Turbo Powertrains (2.0GT, 2.5GT, 2.5XT)
Posted