-
Posts
46 -
Joined
Content Type
Profiles
Forums
Gallery
Posts posted by mikeydrives1
-
-
Cobb stopped making those awhile ago, so any set you find (IF any..) will be used.
-
Just some insight from my setup...
New suspension setup:
JDM Spec B bilsteins all around
-Fronts on LGT specific swift sedan springs (corrects front ride height)
-Rears on OEM JDM springs (stiff like the swifts) and 3/8ths Subtle spacers/extended lugs to correct rear ride height.
Overall it rides firmer but not harshly, like some setups do that ive been through on my other subarus. Theres about a 2-finger gap on each wheel still, measuring 25.5" from top of fender to ground in front and 26" from fender to ground in the rear. It was about 27-27.5 before all of this all around.
Please note, this is on a 2.5i model, not a GT. I dont think these modifications are required on other LGT or Spec B (US) models to make JDM spec B suspension work due to the fact that those models are heavier with bigger motors/transmissions, compressing the suspension, esp in front, a little more. The issue with my 2.5i with the Spec B stuff was that it rode really high in the front because of the lack of a larger motor/6spd pushing down on it.
-
New suspension setup:
JDM Spec B bilsteins all around
-Fronts on LGT specific swifts (corrects front ride height)
-Rears on OEM JDM springs (stiff like the swifts) and 3/8ths Subtle spacers/extended lugs to correct rear ride height.
-
-
My 2008 2.5i daily driver
-
If i have a 2008 legacy 2.5i, what year STI pinks will fit me?
Would it be 2008+ impreza (sti / wrx) ?
-
Humble Rumble's 2012 Legacy 3.6R Build Thread
in Fifth Generation Legacy (2010 - 2014 )
Posted