xVern

Ohh, what s402 suspension parts do you have?

In for v11!

I like the donation idea, it's been working out well it seems. Either way, I'm in for v10.

I guess if we're starting interest, im in!

Awesome fix. Mine started doing this yesterday. Looks like i know what i'll be doing today!

Here's my take. Took less than 10 minutes from start to build and to finish.

 

http://imgur.com/llvFZoh.jpg

 

http://imgur.com/TkEPgAv.jpg

 

 

My point it's this it's way easier than I was thinking. This sub $100 mod is beyond worth it.

Awesome, this worked first try. Unlike the ver8, which i always had problems with the maps not loading. We didn't even need to do a group buy, awesome!. Keep up the good work OP, donation on its way.

I don't know, seems easier to tap into the mirror harness than running a wire to your fuse box. The less wire to run the better IMO. Also, i wont be removing it, so having 100% of the wiring invisible is nice.

ah screw that, I found something better. I was planning on doing a rear facing camera too, so I just bought this:

 

http://ecx.images-amazon.com/images/I/51-Z94hJk4L._SL1050_.jpg

 

 

Now...tapping into that 3 pin connector. Is it + on the very left, and - in the middle?

Good job. Couple observations:

 

1. It is better to buy flat USB cable - the seam between the windshield and the headliner is quite narrow. A thin flat cable = less deformation on the headliner edge.

 

2. You could get 12V ACC power from the mirror harness - the 3-pin white connector on the right - that would have saved you quite a bit of work

 

 

http://legacygt.com/forums/attachment.php?attachmentid=204144&stc=1&d=1425764124

 

Plug-and-play solution:

 

http://www.subaruoutback.org/forums/members/22738-error-albums-dash-camera-installation-picture4449-03-cam-harness.jpg

 

 

Any idea what type of connector that is? If we can figure that out, it'd be easy enough to make a Y splitter so you can plug in both your mirror and dash cam.

Yea these grills are pricier than gold usually, I can imagine what you paid. I waited 6 months cause I was determined not to pay a crazy amount, finally Catalyst hooked me up for a killer price.

 

So there looks to have been three tabs on the bottom that need to be trimmed or taken off. And then the bolt holes need to be moved. I haven't looked at fastening the bottom of the grill yet, but with the hood closed it's pretty secure so it won't fly away on the highway or something like that.

 

 

Same mods needed for a 08-09? Or are the grille sizes different all together?

I think most of my other mods are waiting for the 08 VB mod to come.