bermo

send a cell number. Shop uses 5000k (daylight?) led, so color is pretty close. I have a bsm car, so can you see difference. Some were garaged always, other outside.

Message sent

i have a couple, all from 05 cars

05 and 06 are the same I believe?

Can you post pics or I can send you my number for text.

Thanks.

I have one but in QSM

Thanks, but I really need a BSM color. Not wanting to paint.

Looking for the hood scoop for an 06 GT in BSM.

Just the scoop.

Company 23 tools:

• Cam tools for the LGT #500 and #501

• Piston ring compressor #516

$100 for the lot. Plus shipping.

Tomei 3 bolt catless uppipe, already wrapped.

Went external wastegate.

$75 plus shipping

Exhaust wrap.

Came with Tomei Extreme headers.

2" wide, not sure the length.

$40 plus shipping

KS Tech 73mm CAI with heat shield and a nice stainless coupler for Perrin inlets.

Low miles, pulled too much air for my set up.

KST-CAI-STK-LGT-2

Paid $270

$175 plus shipping

Got a KS Tech 73mm CAI with the heat shield.

Pulled too much air for my set up.

I have a misfire on my built motor and Cobb plano is doing a leak down/Compression test this week.

Curious on the misfire diagnosis.

Anyone running the 8mm Phenolic spacers with this TMIC??

My car is apart right now but I don't think there are clearance issues between the intake runners and the big top mount.

Got the Cobb installed without any issues, seems the Perrin BPV has too much length.

However, I do have the Sti booster/MC installed, but I dont think that comes off the firewall any farther than LGT? Could be wrong, but that may be partly to blame.

I ended up trimming the stock BPV hose in an effort to reduce the angle coming off the valve itself after I rotated it to clear the MC. Still not right as I get the compressor surge when the throttle is lifted.

Not sure if its because the reference line may be pinched on the MC or the return to intake line is partially pinched. Hard to tell WOT.

I've tried adjusting the spring one turn harder and one turn softer but it still surges.

It seems the Perrin BPV is too tall for the Grimmspeed, it worked wonderfully on the Perrin TMIC, but not so much now.

Gonna try the Cobb and see what happens.

Thanks guys, just bought a Cobb from Infamous.

Great price BTW with the sale he gas going on.

What BPV you guys running with the Grimmspeed??

I got a Perrin, and the vac line out the top is hitting M/C hard line. I've tried rotating the valve but the other side is getting pinched.

Thanks for the updated pics, the grill looks super good. I bet your list is gonna get longer!

I like the bigger emblem, seems like a good fit.

If your taking names, put me on the "05-07 S402 style" list.

Whether it be my Crown Vic mesh or your mesh, either way.

PM if necessary.