Sicotic
-
Posts
406 -
Joined
Content Type
Profiles
Forums
Gallery
Posts posted by Sicotic
-
-
I have had my 20G TD06H Kinugawa for over a year about 7.2k miles on it now. Havent had one issue witht he turbo. I hit full boost around 3300 rpms. Pulls hard and takes a workload. I dont drive it like a grandma either. Any brand will have its up and downs.
-
Do you, by any chance, have any dyno charts or Power/Torque plots?
Ill find the dyno slip.. It was like 356/367on 90oct. Now I live in Ohio with better gas. Soon to be e85
-
Wow why haven't see this thread. I have had my Kinugawa 20gTD06 8cm for little over a year. I would recommend this turbo with no doubt. It is very simple installation except the inlet(because of Subaru). I hit about 23 psi at 3400 rpms. I love how it throws me back in my seat. Hopefully it will last a little bit. Worried though bc it might have seized but nothing to do with turbo. I'll keep you guys updated.
-
Going to be needing a e85 tune soon!
-
-
Y does you err on your clock.
-
Coupon code is LPLF70. Enjoy it's 5% off!
-
Still valid as of march 25th.
-
Installed.. Paint is a little off... I'll fix that
-
Anyone have fitment issues with kit? Mine panels on side are barely fitting. My hvac is gapped from the kit a little.
-
Car:
-2006 LGT 5spd
Factory electronics:
-Standard radio, no sub
-No Nav
Parts used:
-JDM Twin HVAC Double Din adapter (JDM part #H6217AG911 from avoJDM Parts) $348
- SVX Dc parts (AE64.com)
(14 pin audio cable, i88 adapter) $35
Factory hazard switch(for now)
Pioneer double din avh-4300bh $250
Pioneer 6.5" speaker in all doors $100
2 12" duals subwoofers in custom box. For free! Impressed with quality!
So $733 for everything. It is a great Improvement over stock that's for sure! Will post pics soon!
-
I had to tap my screws. They were stripped out. But in the end it was pretty simple.
-
E85 in Alaska?
Lol I wish. Don't even have 91. Getting out of army going back to Ohio. Where I live has about 8 stations with e85.
-
Cryo I might giving u a shout soon... Need way retune for my e85 ill be running.
-
-
Car:
-2005 LGT 6MT STI swap
Factory electronics:
-2008 Standard radio, no sub (will be selling this now
)-No Nav23
Parts used:
- Appradio 2 ($320)
- Pioneer - Android Connection Kit for AppRadio 2 ($100)
- Bought my car a Samsung Galaxy Nexus 32GB ($100)
-JDM Twin HVAC Double Din adapter (JDM part #H6217AG911 from avoJDM Parts) ($440)
- SVX Dc parts (AE64.com)
(1) i88 adapter harness $20.00
(1) 14-pin forward harness $ 7.50
- JDM Hazard Switch (JDM part #107-090-001 from Japanparts) ($44)
- Used the same 3M vinyl wrap chewee22 did but matted the finish (Amazon $23)
- cheap backup camera from ebay ($18)
Comments:
1. Need to finish the vinyl wrap on the shift boot console. Also learned when using vinyl in the car make sure you use "Cast" type vinyl so it doesn't shrink when it gets hot.
2. Also need to file those damn tabs down from the hvac unit, the gaps are driving me nuts.
3. Reinstalling the Kuda Mount for Accessport, but instead going to use it for the galaxy nexus.
Y was it 440? Men was only 359 shipped to Alaska.
-
Car:
-2005 LGT 6MT STI swap
Factory electronics:
-2008 Standard radio, no sub (will be selling this now
)-No Nav23
Parts used:
- Appradio 2 ($320)
- Pioneer - Android Connection Kit for AppRadio 2 ($100)
- Bought my car a Samsung Galaxy Nexus 32GB ($100)
-JDM Twin HVAC Double Din adapter (JDM part #H6217AG911 from avoJDM Parts) ($440)
- SVX Dc parts (AE64.com)
(1) i88 adapter harness $20.00
(1) 14-pin forward harness $ 7.50
- JDM Hazard Switch (JDM part #107-090-001 from Japanparts) ($44)
- Used the same 3M vinyl wrap chewee22 did but matted the finish (Amazon $23)
- cheap backup camera from ebay ($18)
Comments:
1. Need to finish the vinyl wrap on the shift boot console. Also learned when using vinyl in the car make sure you use "Cast" type vinyl so it doesn't shrink when it gets hot.
2. Also need to file those damn tabs down from the hvac unit, the gaps are driving me nuts.
3. Reinstalling the Kuda Mount for Accessport, but instead going to use it for the galaxy nexus.
How did u get the gauges on there
-
the soound doesnt sound good. very faint any reason y?
-
just installed mine. Worked on the first shot. Awesome thanks Jazzy. Only thing is might want to add details about the bro kit with the extra Rca block thing. it gets a little tight but it fits. Once again thanks.
-
just bought the pro kit, hopefully it will be here soon!
-
im from Columbus GO BUCKS!
-
I'm Back, After going stage 2 with the catless up/dp the car was to loud without mufflers. So I put them back on about this time last year. Couple of months ago I put a vf52 on the 05 wagon and had the car dynoed and tuned. I didn't have a gaskets between the mufflers and Mid pipe. I had a small leak there. So now at 21psi with the new turbo, I decided to put 2 washers on each bolt in between the mufflers and Mid pipe to stop the little leak.
Car sounds much better now.
My 09 Spec B at stage 1 still has no mufflers. It sound great too.
Using the 1/2 impact gun, the nut's come off the bolts before you can pull and release the trigger. Air tools are great.
Exactly.
-
is there a link to walkthrough to gut the cats from down pipe?
-
will this cable work with the 06's?
[ame=http://www.amazon.com/OBD2-Diagnostic-Cable-KKL409-1-VAG-COM/dp/B002WIN8VQ/ref=sr_1_1?ie=UTF8&qid=1316411215&sr=8-1]Amazon.com: OBD2 OBD II Diagnostic USB Cable For KKL409.1 VAG-COM 409: Electronics[/ame]
)
Kinugawa Turbo Review
in Turbo Powertrains (2.0GT, 2.5GT, 2.5XT)
Posted