Ohitsspencer

Here is a buddy of mine on lgt suspension with Tein s and 17in wheels with 225/40 tires

http://img.tapatalk.com/c6e4d812-775f-29f0.jpg

Sorry to bump this old thread, but how come you have to replace the rear bump stops? Will it work without doing that?

Posting this as a new post to bump it up!

 

http://img707.imageshack.us/img707/493/stellawhite.jpg

 

Wheel brand/model: 5zigen Super 6

Wheel height/width: 18x7.5

Wheel offset: +35

Tire size: Goodyear Eagle F1 225/40/18

Lowered?: BC BR Coilovers

Modified Fenders?: Rolled F/R (Need more roll, and some pull)

Camber: Fronts fully cambered with top hats. Not sure on the degree though. Going in for an alignment this week, and I will update.

Looks like you need to touch up your grille Matt....

 

 

I also met Aaron, and he told me about how he was going to detail your car. I saw his thread on Nasioc, and it turned out REALLY good!

You sir, need this. http://www.rimsntires.com/specs.jsp

 

Type in your stock wheel on the left, and type in the other on the right. It will tell you all the things you need to know.

No problem. I was going to run 8.75 wheels with a 20 offset, and that would of been a slight poke. So 9 with +38 should be golden. I actually might be going 9.5 by +38 soon.

Well, if you do +48, it will require the least amount of fender modding, but you can run 38, and I think that'll be most flush, and look best. +48 will get you really close to flush, if not flush. I would run a 225/40 tire. You could run 235, but it require a lot more work and camber.

http://img35.imageshack.us/img35/3144/stella2h.jpg

 

Enkei RS7

18x7.5

45

225/40r18

?

Tein S Springs

Rolled fenders

 

http://img651.imageshack.us/img651/5019/31848008.jpg

 

Motegi and 1 American racing wheel. Not sure on the model

17x7.5

43

225/45r17

?

Tein S Springs

Rolled fenders

This was original in the "Wheels/Tires" subforum, but I moved it here, since it'll be mainly pictures, with specs. If that was a bad decision, please delete.

 

Alright, so constantly, non stop, everyday, people are asking for wheels specs and fitment. "What are you lowered on?", "Did you have to pull fender?", etc. This thread is for you to post your specs, so the questions can stop being asked. So, if there is already a thread like this, make fun of me and chew me out, I couldn't care less, let's get it stickied. But if not, then swell, because this thread is needed in my opinion. Here's what you should post. If you have suggestions, please tell me, and I will edit this post.

 

NO CHATTING. If you have a comment or a question, PM the person. If you like their picture, click the thanks button. This is a picture thread, not chat.

 

If you think additional information is necessary for your case (ie: Tire brand) then put it in, that's fine.

 

Please make sure to post what you are lowered on. Don't be afraid to get specific.

 

Picture of Car (This is a MUST)

 

Wheel brand/model:

Wheel height/width:

Wheel offset:

Tire size:

Camber F/R:

Lowered?:

Modified Fenders?:

Miscellaneous Suspension:

 

If you have a suggestion on what should be added, please PM and I'll get it into the first post.

 

 

Now, let see if this works, and helps out a lot of folks. I know I would really appreciate it personally. Hope I don't sound like an ass, just want to get this stuff out there. Now, let's see some fitments!

Haha that's why I chose both options. They come with a black center and chrome lip so I'll try that for a while until I coat them

Opinions? I'm more than likely getting the wheels, just need to decide the color.

 

http://img221.imageshack.us/img221/3523/photo2cj.jpg

http://img215.imageshack.us/img215/4184/photoyvv.jpg

I don't need to know why you went with teal or light blue in the first place, but a damn good change! Much better!

 

Haha it's how it came when I bought it.

Before:

 

http://img835.imageshack.us/img835/710/stellaf.jpg

 

After:

 

http://img209.imageshack.us/img209/1710/tumblrlz5je3nj9m1rn8f1a.png

Wtf is this shit

 

Haha, I couldn't tell you if I wanted to. I'm definitely not a fan though.

http://img215.imageshack.us/img215/1573/photo1xn.jpg

 

Spotted these gems today at work...

Yes, powder coated. No, just flat gray.

Goodbye, Teal:

http://img835.imageshack.us/img835/710/stellaf.jpg

 

Hello, Gunmetal:

http://img263.imageshack.us/img263/467/tumblrly0pc6wjz61rn8f1a.png

They do look like the volks, but the DPT are almost identical. And about $500 cheaper a wheel. Haha

I don't know the exact wheel, but you can get some look alikes? XXR 527, Rota Tarmac 2, Tarmac 3, Rota P1, Rota DPT, Rota G Force...

Sorry about that Try again

 

[ame=http://www.youtube.com/watch?v=OrNUwLu3Vzk&safety_mode=true&persist_safety_mode=1&safe=active]GMS Catback with Cobb DP - YouTube[/ame]

 

This is GMS Catback with COBB Down Pipe. Mmm

Enkei RS+M 18" Powder Coated Teal

 

http://img835.imageshack.us/img835/710/stellaf.jpg