dodgyozzy

Any thoughts on this product?

http://perrinperformance.com/i-19229535-shifter-stop-for-2015-wrx.html?utm_source=PERRIN+Retail&utm_campaign=9cb8944438-Retail_PERRIN_Shifter_Stop_WRX&utm_medium=email&utm_term=0_879fefc334-9cb8944438-421245869

I've been looking for a lightweight crank pulley. I think I've finally found a solution. The 2013+ BRZ pulley looks the same as ours. Can anyone confirm they're the same part number? There are several outfits that make a lightweight crank pulley for the BRZ.

From what I remember it is different. There is a potential group buy on one that will fit if we get enough people.

http://legacygt.com/forums/showthread.php/gauging-interest-5th-gen-light-er-weight-crank-pulley-group-227131.html

This is a timely thread for me. I'm picking up a set of 08+ Sti Brembos with pads. They said they might have rotors as well but I want to be sure what it is I need.

All their parts are off STi's so will 08+ rotors fit on our cars? I was under the assumption that they wouldn't but maybe they are dual drilled?

Also will the SS break lines from an STI fit or do I need to buy ones specifically for our car.

Thanks

Bumping the old thread back to life!

 

Jordan of Gladman Performance Fabrication is interested in fabricating a proper 5th gen USDM MCB for us!

 

Anyone local to WA or Vancouver who could stop by?

Been busy with work and just catching up. I live in Vancouver if you guys still need a test car for this.

For me its the C-Mod grill, wrapped in some flat black pearl vinyl (overall look is very similar to the JDM/ADM ones because the mesh is recessed). The emblem is the rear hatch emblem I ordered from my local dealer.

I modified it to attach to a harness that secures it.

Are you guys happy with the C-Mod Grill. Quality and fit are good? I might order one up if so.

Here's my gathering from reading this "sticky"

 

Parts from other models/years that fit our 5th gen

 

2004--->up Brembo FRONT caliper

2004--->STi Front Rotor

2008--->up Brembo REAR caliper

2008--->up rotors will need a kit. KNSbrakes sells them as of this post, but not sure if Fred beans sells them.

# These Brackets allow you to mount Gold Rear Brembo Caliper (04-07 STi) or Black Rear Brembo Caliper (07 Limited STi) or Red Rear 2 pot Caliper (06-07 WRX) on to your 2010 - Up - Subaru Legacy

 

Any 2004 STI wheel

 

2008-2012 WRX rotors and brake pads are direct fit according to RCE.

Checked 2011 Legacy 2.5i rotors and brake pads are same product number as the 2008 WRX so it looks like the 2008 and up WRX or 2011 Legacy rotors and pads

 

RCE black springs...40k miles on OEM struts. Review is that it is not harsh and it is the way it should have been.

Sorry for the total Noob questions but if I'm reading correctly 2011 Sti Front and Rear Brembo's will fit our cars.

Would you need to get new rotors?

Reason I ask is I saw a complete set of Brembo takeoffs from a 2011 STI with 27k. Includes installed brake pads and calipers for $1600. Not sure if this is even good price or what else I would need to get to make them work?

I've got mine on order, so hopefully it will arrive for the weekend.

Do you guys suggest starting at one corner and working your way around or do you tack down both corners and alternate your way to the middle?