shonkadog

Thread revival here, I recently did new transmission fluid, (motul)..... Noticed a little " noise" while shifting to each gear. Kind of just a clunk. Engine off, car in the garage, very clunky shifting noise while laying under the car and watching the mechanical shifting action.... It's been very cold lately so that's what I'm thinking is making it loud enough to hear while driving.....? I know these are always loud, but should this mechanical clunk be normal going into each gear? Should I go for the short throw shifter as an excuse to make it quiet? Thanks 07 legacy spec b. ( Stock shifter)

6 speed manual transmission/front diff drain, 07 spec b 32195AA020 is indeed the PT number for the (14mm aft bolt) Took 4 qts to hit the full mark. The forward drain plug was the t-70.

Yes that's what I need. I really don't care if it's allen or hex. As long as it works!!!! Thanks

It's where the blue arrow is on the first post of this thread.......but mine isn't an allen head

It's the drain bolt in the transmission pan.(front diff) It was a 14mm. Now rounded off. 07 spec b. Options are to leave it and suck as much fluid out of the t-70 hole, Source the 14mm bolt and try the bolt extractor...... Weld a nut on top and try another socket....... Not sure why it was seized. Dealer charged me for the services before...... Who knows if they actually opens those up....the t-70 drain plug took a 4 ft breaker bar to loosen and pb blaster........thought the 14 mm was turning with the breaker bar...... nope just rounding.

Does anyone have a PT number for this t-drain plug? It's the 14mm head. Thanks