-
Posts
67 -
Joined
Content Type
Profiles
Forums
Gallery
Posts posted by YN-TGL
-
-
http://www.cite-sciences.fr/english/ala_cite/exhibitions/cosmomania/img/preparez-visite/photos/23-mars-2057-ext.jpg
-
black LGT with roof rack and JDM tail light garnish, spotted in Nanuet NY right by All Transmissions.
This was me.
My girl lives right over there.
-
Wheel covers?
-
prodrive pff7
-
No, you shouldn't need to roll with that size wheels. What size tires? You should consider lateral links to run a little negative camber in the rear. Perrin makes pretty good spherical bearing links.
-
SMH.... *sigh*
Ahhhh, the old "do rota g-forces rub" question.... It will never get old...
-
Oh, and I also have the Perrin PSRS LCA Bushings which push the wheel forward and cause them to rub more...
-
Yeah, my car is also slammed though.
Thanks for the compliment.
-
Dunlop Direzza Star Spec Z1's - 225/40/18
-
New wheels, Tenzo Type M 18X8 +37 in Bronze. Sitting on BC Racing Coilovers. Yes, they rubbed before I rolled and pulled.
http://i211.photobucket.com/albums/bb93/bpotts1/Sideshot.jpg
http://i211.photobucket.com/albums/bb93/bpotts1/Frontside.jpg
Compilation of available clutches for BP/BL
in Transmissions
Posted
So I need a new clutch (AGAIN). This clutch is an ACT HD Street Clutch With ACT Streetlite Flywheel (chatters like a mofo). It was installed about 2 years ago and has about 30,000 miles on it. NEVER been launched or beat on in anyway. The other day I was driving in traffic and all of a sudden the pedal stiffened up and it started vibrating and chattering like crazy and engaging very high on the pedal.
Took it to my mechanic and he said it seems like I bent my pressure plate but he'd have to the tranny to know for sure.
MODS:
Fully bolted
VF-52
750cc Inj
AVO FP
Perrin TMIC
Etc...
Power: 316whp (on a Dyno Dynamics rig, numbers may be a little higher than actual)
So before I pull my tranny I'm going to order another clutch so if I do need to replace it I have the parts on hand since this is my only car and I want to minimize downtime.
So I obviously not going with ACT again, 2 years and 30K miles on a "high performance" clutch that has not been abused is sub par to say the least.
Possible replacement choice:
Exedy Stage 1
CM FX200 or FX300
Question - Based on my mods and power levels do you think the Exedy Stage 1 (The cheapest) would be sufficient. And if I went with the CM, should I go for the FX300 over the FX200 based on my power levels?
TIA