sqapg5

This is the normal shine on the road.. barely visible..

 

http://farm5.static.flickr.com/4005/4548579060_1c49d7eee9_o.jpg

 

This is when i am covering the right hand side of the lamp(notice the fish tail cut off on the extreme left...)

 

http://farm5.static.flickr.com/4068/4547942645_dd0c96f0cf_o.jpg

 

This is when i am covering the left hand side of the lamp( notice that the right hand beam is shining exactly the same spot as the left beam... overlapping at least 70%... and the right side of this beam cut off isnt straight but a u shape..)

 

 

 

http://farm5.static.flickr.com/4060/4548579188_f610850fc3_o.jpg

 

Now this is the normal beam outlook with cars as guide..

 

http://farm5.static.flickr.com/4015/4547942775_1e74cb8d22_o.jpg

 

really frustrating.. i have just found a workshop and he mentioned he will have to dismantle the whole headlight and also look at the projector shield and also understand why the throw is soo bad.. but i would love to hear some views or people with experience can tell me what is most likely the problem...

i need a guide how to go about taking the shield..

 

i am using a canon 50d... i maybe able to pull it off..

i went to dismantle and checked.. it is flushed nicely and the spring latch is also in place... i just dont quite get the fishtail cutt off at the sides..

 

many argue that the left is higher.( the arc) as we are a right hand drive country and it is for seeing the road signs etc...i would have to agree with it as it also prevents blinding of oncoming traffic.. just that comparing the very first post of the thread.. the way both are overlapped providing a very nice outcome is apparently impossible. have been screwing the knobs... trying my best and as per my picture postings.. you could really see the difference..

 

if i was on HID. would you say that the outcome might be better? or it is totally irrelevant to my problem? the throw for my beam is around 5 meters in front of my car and the rest of it is really history...

 

I would like to sincerely thank everyone for your kind help. appreciate it. I guess it could be just a faulty set that i have.. unless anyone has previous problems like mine and have solved it.

my bulbs need to be flushed?? need some help on that.. flushed??

my projector is like only 1/3 protruded out.. i find it kind of wierd too... from those i see in most cars.. most of their projector are at least half protruding out.. not sure if this could be one of the reason?

wonder if there was an installation problem as in the projector is faulty? its upside down?? or its due to non HID bulb ? or i need to do some adjustments? coz its a pain to drive in such conditions.. and not that i havent been asking around in singapore for help but apparently, none is able to give me an answer or to rectify.. they only say it should not appear this way..

 

anyway in my country its a right hand drive..

or if you may allow me to briefly draw it

 

 

I have merely shifted the right beam up on the picture,,, but if you put them together it looks like the photo taken...

 

http://farm5.static.flickr.com/4059/4541756521_da045e5c1b_o.jpg

Hi there,

 

Greetings from Singapore.bought a second hand angel eyes.. when i hooked it up.. my light(beam) is uneven.. i have tries both knobs to adjust horizontal and vertical but this is the best i can do... i am sure it shouldn't be this case...

 

anyone can help me out? or do i need to repair these lights?

 

any sort of help is greatly appreciated..have been posting in my singapore website and its been months and still no reply..

 

 

http://farm5.static.flickr.com/4067/4540281375_354e1df10f_o.jpg