ram7884

Have rear tan leather seats in good condition out of my sedan for someone who has cloth seats or needs a replacement. Fronts seats have been used for my interior swap. Looking for $100 obo. Also have an 07+ passenger detection sensor if you need it to run non-stock seats up front for $40 obo.

Bump for a good seller. Seats are in good condition!

 

Sent from my SM-N970U using Tapatalk

and another

Long time lurker but here is my first pic from a couple of snows ago

I would guess pre and post facelifts would be the same size. I have the post facelift headlights and am using bulbs made for a Chevrolet Spark. Can be found at your local Autozone. Can't remember the exact model. But keep in mind that these are dual filaments. I wanted to have these bulbs act like usdm.

 

 

https://www.autozone.com/electrical-and-lighting/turn-signal-light-mini-bulb/sylvania-longlife-turn-signal-light-mini-bulb/515154_0_18269_2805

 

 

Also, because I wanted dual filament bulbs in that location, I used a usdm rear dual filament socket (for our car) slightly modified.

 

 

As for leds, they may hyperflash. I don't think a code would get thrown.

 

Negative. Bulbs from my usdm turn signals are not the same as the ones in my pre-facelift jdm headlights. Was just looking for the correct bulb size if anyone knows what they are running in their pre-facelift headlights.

Hey guys, what is the bulb size for the turn signals for the pre-facelift jdm headlights? Anyone using LED bulbs? Not sure if installing LED would make the car throw a code. Thanks in advance!

Anyone know where to pick up a jdm license plate delete? I like the carbon STI one on subispeed, but would prefer something that bolts up rather than requires 3m sticky to be put on the bumper.

looks good Johnny! Still working on getting some more parts together for my Rev AC front end swap. Anyone know where to pick up the totsubo license plate brackets?

Hey guys, for those of you who have the Rev AC front bumper, what fogs did you use with it and/or where can you pick them up? Any pics on the install or brackets would also be helpful. Thanks in advance!

Hey Guys, So I'm selling a set of refinished golds. 2 mint with no imperfections and other 2 freshly redone by Ye Olde Wheel Shop in MD in FLAWLESS condition. If you are local to the area you know their reputation. Looking for $1k (no tires) and a local pickup. Before you bash me know that I have more than my asking price in them with the refinish. Just wanted to put people on notice if they wanted to PM me or e-mail me (my username at gmail) before I take pics and post them up for sale in a thread. If you are looking for a set of new BBS golds these are as close as you are going to get. Thanks!

Hey guys, I just picked up my goldies from Ye Olde Wheel Shop from being completely refinished. They used proprietary Subaru colors and the gold is as close to perfect as I have ever seen. If you are in MD I would HIGHLY recommend these guys because their work is nothing short of phenomenal. Unfortunately, i'm selling the car to buy a house so these must go. I'll be making a FS thread this weekend with pictures but feel free to PM me if you think you might be interested in a brand new set of goldies!

Anybody looking for a spare Silver BBS PM me. No curb rash, bends, or cracks. I'll put up a thread in the wheels and tires section over the weekend most likely, but wanted to mention it on here since I noticed some people post on this thread saying they are looking for one.

 

 

And because i'm a whore here's my crappy cell phone pic

noob question, why can you just use adapters to fit 05-06 bbs instead of only buying a set from an 04?

 

I did this and in all honesty it's easier to just run the 5x100 setup. You have to roll the fenders and with the offset and the adapters they poke out quite a bit. If you want a set of the 5x114s I know where you can find a set Sold the adapters to a friend for his vw but I still have the wheels. haha

How do the seats look? I fail @ Google cause it only shows 05 and 11 interior leathers.

 

they looked dirty but no rips or tears from what I could see. I just don't know if the seat rails and everything would be the same to bolt right in or not.

So I might be picking up a black leather interior out of a the generation prior to the 2005+ Legacy. Anybody know if this will fit in a 2005? I might be selling the black or my current tan interior if anybody is interested.

Hey guys,

 

I'm looking for the surround with the cubby hole and adapter that goes around the boot of the MT for an 05 legacy along with the silver trim that goes up the sides from there up to the radio. I would also be interested in an 06 spec b interior if anybody has that. PM me if you have any of these items. Thanks!

So not to be stupid, but has anybody checked out SVX hubs? I think they are 5x114...does anybody know if they could be used?

Has anybody put on 5x114 bbs wheels using a 1" adapter? I was wondering how this might have worked out for anybody who has tried it. The adapters only run between $90-$100 and it seems like it might be a good economical solution, but I don't know if you would have to roll the fenders to keep it from looking like the wheels are sticking out too far.

Thanks, i'm probably going to take a look at them this coming weekend to see what's up. I'll def pick some of that paint up if I do because i'm anal and i'll want to make them perfect before I put them on. Bnguyenbb6, did you use bondo or some of that epoxy weld to touch up the rash on your rims?

So I had given up my search for these wheels when today I found a gold set near my house with some BF goodrich g-force rubber that are claimed to be 75% good for around $1200. The wheels are supposed to be pretty good with some minor curbage one one. Is this a decent price? I was also wondering if anybody knew where I could find some gold touch up paint that would match in the event that I picked these wheels up.