yogis wagon
-
Posts
22 -
Joined
Content Type
Profiles
Forums
Gallery
Posts posted by yogis wagon
-
-
I know about the DRL, but on the 08-09 models, the DRL are on the high beams, not the low beams.
So normally, when I put down the handbrake, only the High beam should be on, not both !
I spliced the ballast connector onto the H7 plug in the headlight, so I'm thinking, that I might have inverted the + and - wire ... I'll check on that later.
-
I finally did my RX-330 retrofit, everything looks good, but now I ha ve a problem. The first time I plugged the ballast, on one of them, the 9006 was inverted so it didn't light up. I corrected the thing right away and everything lights up perfectly, to perfectly !
Now my low beam are always on, exept when the hand brake is on, but in every other light switch position they are on. Would it be possible that I burned the relay in the fuse bloc or damage the DRL module ?
-
Allright !
I also will try to make a custom curved shield. I'll post it up once it's done !
-
I just received everything I needed for my RX 330 retrofit, but now I'm wondering something. I ordered a set of TSX-R lenses and when I opened the box, they actually ship the whole TSX-R projector. Now, am i still better of using only the TSX-R lenses in the RX-300 projectors or using the whole TSX-R projectors ?
Witch set-up will give me the crispest and widest light output ?
-
Received mine last week. Took about an hour to install.
Simple and easy to follow instructions !
Really happy with the fit and finish !
-
VGB1 are available now, I'm order 59 !!
Rx330 OEM conversion for Full OEM HID's Write-up
in Walkthroughs :: Basic Operation & Maintenance
Posted
Finally, today I unplugged both ballast, check a few fuses and play with the light switch.
Then I plugged back the ballast and now they work as suppose. Only when I turn the light switch to the correct position. So now, they don't light-up anymore when I put the handbrake down....
Anyways, problem solve, I guess ....