-
Posts
34 -
Joined
Content Type
Profiles
Forums
Gallery
Posts posted by itsdaniel
-
-
-
added BC coil rear extenders
-
PM replied back.... i think. Bump!
-
Updated post, KN intake sold.
-
Updated post, car is sold!
-
-
-
what shift knob you got?
Sent from my iphone using tapatalk
oem
-
-
-
Rotors, coilovers, and intake pics posted! Please PM me again if I have not responded.
-
-
Cobb and CF grill pics added
-
-
So are yours actually wagon Prodrives or just the same as mine? As you can see from my pics it's 7.5" tip from the can to the underside of the tip.
After measuring the ones i had, it is the roughly the same. from the bottom i got 8" but not sure if you went flush to can or to edge. The top measured 9". Is it confirmed that Prodrive made 2 different exhaust for sedan and wagon?
-
Think you pretty much nailed it ttnio
HA! so whos getting it? Shralp or ttnio?
-
do you have pics of the oem hood scoop? is the clear coat faded on it?
I added the OEM hood scoop. The clear coat has not faded. The color is DGM.
-
Rainy day COVID lock down with nothing better to do than go pull the cover back on the track car and take pics of the Prodrives for folks that want to know spacing. These are sedans to be sure, note the length of tips and compare to the sellers specs maybe they are different? Would love to have gotten wagons but these are so hard to get, when you see a pair you buy them. Don't mind the spacing differential all that much, I'll take an innie rather than an outie on exhausts, can't stand ones that stick out beyond the bumper, too ricey. I was concerned a bit about discoloring on the paint around the valance. These have been on a few years now, there is slight discoloring around the outer ridge of the valance but no melting and the clearcoat is still there. Probably could be rubbed out twice a year to keep it nice and bring the color back. I just can't really see it on RBP, its dark enough to hide it pretty well.
I added some pictures of the exhaust. Doesnt stick out past the bumper. Interesting to see that on the wagon, i never knew.
-
I prefer local pick up at this time and will consider shipping if they are still available at a later time. updated the post
-
SoCal- Los Angeles parting out 08 LGT - Prefer local pick up
Unfortunately, blew the main rod bearing on the shortblock. loud knocking noise. Dealer quoted me $6-7k and it doesn't seem worth it anymore. I decided to part out and put the OEM parts back on to sell/junk. I'm still parting out as we speak. Super sad still, but life must go on.
Added Note: I did my best to look up the lowest price I could find and then price everything accordingly. If you see something you like and the price I have listed doesn't make sense, I am open to offers. I'm trying to be as reasonable as possible.
Parts sold:
Prodrive exhaust mufflers (bolt up to stock mid/y, i believe they are discontinued, rare?!) -$400 - SOLD to Moddingbug
RRev carbon fiber front grill (surface cracks in a few locations) -$80 SOLD to Safetybreaks
RRev carbon fiber fog light covers -$80 SOLD to Osker626
RRev carbon fiber hood scoop - $100 SOLD to Moddingbug
Cobb front and rear sway bars (someone correct me if i am wrong but the front is a 25mm and the rear i believe is a 22mm but is adjustable)- $250 SOLD to Safetybreaks
HR lowering springs - $100 SOLD to Safetybreaks
HID head lights - $25 SOLD
HID fog lights - $25 SOLD
Muteki red light nuts M12x 1.25 -$20 SOLD to Dadbod
KN short air intake - $125 --> SOLD to Joser619LGT
BC Racing BR coilovers (~40k miles had these installed in 2016, car has 101k so average 10k per year) - $600 SOLD to Abductee
BC Coil Rear Extenders - $20 SOLD to Abductee
DBA slotted Rotors front and rearSOLD
Rommel Front lip (cracked, tried fixing with bondo, chipped in few locations) SOLD
CAR and PARTS SOLD. please close!
SoCal - Los Angeles, Parting Out my 08 LGT, this is what for sale
in Member Classifieds (2005 - 2009)
Posted