Jump to content
LegacyGT.com

slvrlegacygt

Members
  • Posts

    190
  • Joined

Everything posted by slvrlegacygt

  1. You went with the 2004 oem exedy clutch and flywheel? Is the 2004 sti flywheel dual mass like our spec b flywheels?
  2. I am trying to figure out what clutch and flywheel I should get for my 07 spec B at the moment. I was considering going with a stock setup but I drove my friends wrx with a stage 2 for his 5 speed and the pedal and engagement felt like my spec b. The clutch itself launched the car so hard so it was a great mix of both comfort and performance. Just not sure if that would be the same for the spec b if i got a stage 2.
  3. I have an 2007 Spec B with 180,000 miles on the original clutch and flywheel. Was considering going with an exedy stage 2 clutch. Not sure about flywheel. I heard the flywheel is different than the 5 speed models. What are some good options for me?
  4. I found a rack but it is slightly damaged. I have not seen it in person yet. These are pictures that were sent to me. Is this something that could be repairable?
  5. Have you installed the rack on your XT. I Just picked up an 06 xt project car and was thinking about this swap.
  6. That is what I was figuring as far as which seat goes where but does the driver seat offer more adjusment over the passenger?
  7. would buttons from this style key work inside the blank shell? http://www.ebay.com/itm/NEW-OEM-SUBARU-LEGACY-TRIBECA-UNCUT-KEY-BLADE-VIRGIN-CHIP-FACTORY-TRANSMITTER-/162201303606?fits=Make%3ASubaru&hash=item25c3f37a36:g:xQUAAOSwXeJXfUxy&vxp=mtr
  8. These seats being from Japan. Wouldn't that reverse the levers for adjustment making the passenger the driver side seat.
  9. I've tried searching on eBay and can't really find a seller that has shells with a regular key. Does anyone know a seller or any where else I could look. I'd really like yup do this for my legacy and Forester.
  10. has anyone ever tried doing this on a VDC equipped legacy?
  11. Were you able to install the kit if so what was the outcome?
  12. Trying to do some research since I was in the market for a brembo kit. Doing a wilwood setup seems cost effective. I have a few questions I hope you guys can help me with. Are there any differences between the calipers with part numbers that vary by 1 number at the end for example 120-11132 and 120-11133 I also noticed some have SI at the end of the part number. The brackets are definitely needed for the front rotors? Does anyone know what kind of brake lines the brackets come with? Idk if i was reading this correct but the same calipers used on the fronts can be used for the rears?
  13. Saw a silver modified legacy on interstate 80 around five o'clock by exit 43 Sent from my PG86100 using Tapatalk 2
  14. Saw an 08-09 from Maine at Roosevelt field mall in long island last night Sent from my PG86100 using Tapatalk
  15. I have a spec b with 18's stock if I was to buy a set of these what size tires should I run to keep the same exact sizing with the 18's so I don't throw off the odo
  16. Spotted a qsm 06 GT possibly a spec b with a nice exhaust note at low speeds in the Bronx driving along the throgs neck expressway, couldn't see more because I was jogging.
  17. Can someone take a picture of the black air pump with the cover on, on the driver side I would like to compare mine because the plastic screw I found in my throttle body looks like it could belong to that, I just want to be sure so when I talk to the shop that did the job I have all the evidence I need to show they made a mistake.
  18. I never bring it to a shop but I just couldn't get that last plug.....in the end maybe I should of tried harder
×
×
  • Create New...

Important Information

Terms of Use