Tmemz
-
Posts
153 -
Joined
Content Type
Profiles
Forums
Gallery
Posts posted by Tmemz
-
-
Has anyone with a stromung gotten rid of theirs and gotten something louder? I have the quad tip stromung with a erz catted dp and a sti up for a while now and i think i want something louder. Being at wbm over the weekend and hearing my buddys wrx with a invidia cbe makes mine sound stock, yea i know his wrx sound different. Just looking for some ideas
-
Im on konis with epics and its low but i kinda want to go just a touch lower. What springs would be good seeing as the epics are 1" in the front and .8" in the rear
-
My housings worked out okay for ya?
Yea they were perfect, thanks again
-
It was really noticeable to see when cut right how much is sucked in to bottom it out. And also how short my cuts were on the bad set
-
They bottomed out and i got them tourqued dwn to 50 but i can still see the bumps on both
-
Yea i deff do, will look into it asap
-
Damn. So cutting then to a certan lenghth does not effect anything other than the insert sliding in? It will pull through and bottom out no matter how little i cut, just cant cut too much so the bumps show
-
So it sliding in makes it so it does not move? Because i had a clunk after installing them.
-
Ive got mine torqued dwn to 50 lbs n they bottomed out but the bumps on the konis did not go thru the housing, did i cut too much off then?
-
Wait so are the bumps on the konis supposed to slide into the old housing or will it sit above it?
-
Just installed my konis yesterday. Still feeling them out but i now feel a front end clunk. I also replaced the end links n lca bushings with the install.
-
Just got my konis, stupid question but when you measure on the konis at the bump do you go to the top of the bump, the bottom or try to center it. Either way its a different measurement for the cut on the stock struts?
-
A little off topic, but would it be wise to get a boost guage and or any recommendations on what brand/kind to get. Was thinking cubby pod if i were to get one
-
Would it be wise to get new top mounts? If so does it matter what brand they are like Gabriel or what ever a local parts store has in stock?
-
Thanks, happy to be getting this
-
Just ordered mine today, excited to get it installed
-
yea im probably gonna go that route and try and sell my Bilstien setup
-
Im currently running the bilstien setup with the jdm pinks i bought from a member a while back. Not to happy with the drop and for the price i wish i saw this page 1st. Kinda wanna go this route now since i have the ebiach springs now epics from a grp buy a long time ago but open to opinions on my current setup vs doing this
-
So swapping out the pink front for swift front would prob give me the drop im looking for. Where do i get swifts from, havent seen any sites that sell them. And is there a specfic part number on them or are all front swifts the same
-
quick question here. I am currently running Bilsteins hd with pinks that i got from a member on here. I like the drop from the side view but it seems that the front is much higher than i expected even with a lip on my car. And ideas or are there different front springs that would give more of a drop
-
You selling the black set Claw?
-
Undecided on what rims to get. Really like the look of the rota grids but not sure exactly how good them in 18x8.5 +44 would fit. Also kinda like the xxr 522 which are similar, or if i should go with the simple look of gravels. All in gold by the way on obp car
-
looking for a set of these. It is smarter to buy a set of 18x8 knock offs from wheel dude or spend over 800 for a real set not brand new?
-
Are all 4th gen racks the same? Will fit on any 05-09 legacy?
Koni Shock/Strut & Epic Engineering Spring Install
in Walkthroughs :: Performance Modifications
Posted